Guess aht would help
For now we have no firewalling happening
LAN/WAN set to pass all traffic.
figured thats easiest to see if it passes traffic first.
still nothing :-(
On Sep 9, 2008, at 10:43 AM, Christopher Iarocci wrote:
Glenn,
A few questions come to mind off the top of my head.
Did you enable filtering bridge in the System-->Advanced section?
If so, did you put rules in place to pass the traffic you want?
You didn't tell us anything about the config of your PFSense box,
other than
it's a bridge, so it's hard to really tell what's wrong.
Christopher Iarocci
Network Solutions Manager
Twin Forks Office Products
631-727-3354
-----Original Message-----
From: Glenn Kelley [mailto:[EMAIL PROTECTED]
Sent: Tuesday, September 09, 2008 10:06 AM
To: [email protected]
Subject: [pfSense Support] Transparent Firewall
Greetings folks -
After a really nice long google search I ended up here ...
In short we have a number of ip's a client of ours is looking to setup
PFSense as a transparent bridge/firewall for.
Setup is as follows
Incoming Ethernet Connection from Data Center
|
|
|
SWITCH
|
|
|
PF SENSE WAN (IP 216.119.x.x)
~
............................................................................
....................... external
ip for management 24.182.x.x
~
~~~~~~~~~~~~ PFSense
LAN ( IP 216.119.x.x)
|
|
|
SWITCH
~
~
Their Systems ~~~~~~~~~~
running ip ranges
216.119.x.x
67.184.x.x
65.194.x.x
so here is the deal - we allowed all traffic from WAN / LAN
bridged LAN to WAN
Internally / externally we can ping the ip ranges .... when the
incoming ethernet is into the last switch touching their internal
network - but when we move that to the WAN Switch - no luck.
We know the connections are good - switch is good -
Any suggestions?
I would be willing to pay a small bounty - (as this non-profit
customer is willing (a church entity ) ) if someone could help.
Thanks a ton in advance
After 3 days of scratching our heads - redoing this 1400 times (ok so
maybe not that much)
but enough to know the steps in our heads ... we thought it might be
time to ask.
If this works - I can see a great value to this PFSense product ...
Really nice looking - and it actually can compare very well to the
SonicWall, WatchGuard and other Pix products we see here...
Gotta love Open Source... Let's hope this works out.
Thank again
Glenn
---------------------------------------------------------------------
To unsubscribe, e-mail: [EMAIL PROTECTED]
For additional commands, e-mail: [EMAIL PROTECTED]
---------------------------------------------------------------------
To unsubscribe, e-mail: [EMAIL PROTECTED]
For additional commands, e-mail: [EMAIL PROTECTED]
---------------------------------------------------------------------
To unsubscribe, e-mail: [EMAIL PROTECTED]
For additional commands, e-mail: [EMAIL PROTECTED]
