On Wed, 17 Sep 2008, Chris Buechler wrote:
On Wed, Sep 17, 2008 at 6:55 PM, Joe Laffey <[EMAIL PROTECTED]> wrote:
I have pfsense set up with a WAN, a LAN, a DMZ, and a WIFI NIC (4 NICs). I
would like to be able to use OpneVPN to connect from the WAN and access
hosts on both the LAN and the DMZ (encrypted through the vpn).
Is this possible? I tried adjusting the netmask to make it big enough (I use
192.168.0.0 on the LAN and 192.168.2.0 on the DMZ). But this did not seem to
work. For some reason I lost access to the LAN (192.168.0.0/24).
So I am now trying to get ALL the traffic to go out through the VPN. I
found the push "redirect-gateway def1" option, and this seems to work in
that it routes all traffic over the VPN...
BUT... I cannot get the NAT to work right to get out to the internet. I
tried adding an Outbound NAT setting for the subnet I setup for the VPN
(192.168.3.0/24). But this did not seem to work.
Any thoughts on getting this to work?
Thanks in advance.
--
Joe Laffey | Visual Effects for Film and Video
LAFFEY Computer Imaging | -------------------------------------
St. Louis, MO | Show Reel http://LAFFEY.tv/?e11791
USA | -------------------------------------
. | -*- Digital Fusion Plugins -*-
--------------------------------------------------------------------------
---------------------------------------------------------------------
To unsubscribe, e-mail: [EMAIL PROTECTED]
For additional commands, e-mail: [EMAIL PROTECTED]
