-Ensure that the admin passwords are the same on both firewalls. -If you have a dedicated set of NICs for sync traffic, ensure that you permit this type of traffic. -Create 2 CARP address (LAN and WAN) -Enable manual outbound NAT and specify the CARP address is your default outbound for your inbound LAN (not 100% required)
Curtis LaMasters http://www.curtis-lamasters.com http://www.builtnetworks.com On Thu, Sep 18, 2008 at 9:23 PM, JJB <[EMAIL PROTECTED]> wrote: > Hello, we just brought up a secondary pfsense firewall, fw02. We are > getting the following error on fw01: > > [sync_settings]An error code was received while attempting XMLRPC sync with > username admin http://172.16.4.6:80 - Code 2: Invalid return payload: > enable debugging to examine incoming payload > on fw02 under carp status there is an "enable carp" button and a list of > pfsync nodes: > > pfSync nodes: > > 06b3eef1 > 13e0f43c > 23a1cb65 > 2ef64c64 > 42f4845f > 548d51bf > 705c6a63 > 7910ead2 > b3ade648 > f2e22130 > > clicking the "enable carp" button seems to have no effect on fw02. > > Any suggestions for troubleshooting this? > > Thanks, > > Joel > > > --------------------------------------------------------------------- > To unsubscribe, e-mail: [EMAIL PROTECTED] > For additional commands, e-mail: [EMAIL PROTECTED] > >
