Turn off automatic NAT and check your NAT rules w/ status.php page. -- David L. Strout Engineering Systems Plus, LLC
----- Original Message ----- Subject: [pfSense Support] Routed Subnet From: [EMAIL PROTECTED] To: [email protected] Date: 11-23-2008 11:46 am > Hi All, > > I'm trying to configure a pfsense embedded system to route a public > subnet through to OPT1. > > My ISP has provided me with a /27 routed subnet through my /30 static IP. > > /30: > x.y.z.238 - gateway > x.y.z.237 - WAN on pfsense > > /27: > a.b.c.1 - OPT1 on pfsense > a.b.c.[2-30] - assigned to various servers (using a.b.c.1 as gateway) > > > I can't get this too work. The pfsense router can ping any host on the > internet and any host on OPT1 subnet. > > All of the hosts in OPT1 subnet can ping OPT1 address; but nothing > beyond that. Not even x.y.z.238. > > I've: > - Checked "Disable Firewall" in the Advanced Options > - Have also added any any any rules to both the WAN and OPT1 tabs > under firewall rules. > > > Can someone tell me what I've missed? Please.... > > Thanks, > Andrew > > --------------------------------------------------------------------- > To unsubscribe, e-mail: [EMAIL PROTECTED] > For additional commands, e-mail: [EMAIL PROTECTED] > > Commercial support available - https://portal.pfsense.org --------------------------------------------------------------------- To unsubscribe, e-mail: [EMAIL PROTECTED] For additional commands, e-mail: [EMAIL PROTECTED] Commercial support available - https://portal.pfsense.org
