Hello, I am using pfSense 1.2.2 and it is wonderfull.
However I have one problem with SIP (port 5060) calls. My (german) provider does every 24 hours a reconnect of the ADSL line (PPPoE). Normally that is never a problem. I set the reconnect to 5:30 in the morning. I use siproxd to pass the SIP connections to a SIP phone. It works without problems. But after the 24 hour reconnect I still have the old public IP at the state for the port 5060. So I can not make a new call before I delete the second rule at the states diagnostic page. udp 217.10.x.x:5060 <- 192.168.1.100:5060 MULTIPLE:MULTIPLE udp 192.168.1.100:5060 -> 92.227.x.x:5060 -> 217.10.x.x:5060 MULTIPLE:MULTIPLE 217.10.x.x is the sip provider asterisk server. 92.227.x.x is my public IP (for the current 24 hours). 192.168.1.100 is my SIP phone at the LAN. After deletion the new rule (with new public IP) appears and SIP calls are possible again without problems. Does somebody has an idea or could explain me how to make a cronjob by ssh login to delete all states for port 5060 every 24 hours? I don't want to kick pfSense just because of this SIP problems because I love it very much but also need SIP for my phone line. Best regards Dominik --------------------------------------------------------------------- To unsubscribe, e-mail: [email protected] For additional commands, e-mail: [email protected] Commercial support available - https://portal.pfsense.org
