I've tried to figure this out and am hitting a wall. I'm definately a
newbie on this one. I created the openvpn keys/ cert files on my laptop.
Input them into the pfsense openvpn server and into the dd-wrt openvpn
client portion. Once saved. I still can't ping the remote network going
from the dd-wrt to the pfsense. What do I need to post to get some help.
Not sure where to look for the logs to see if they even talk to each other.
On the DD-Wrt router,
OpenVPN client enabled
Server IP> Ip of the pfsense
Port: 1194
TUN MTU Setting left at default 1500
TUN MTU Extra 32
TCP MSS 1450
USE LZO Compression Enabled
Tun Protocal: Enabled
NSCertType: Unchecked.
Public Server Cert. (copy/past the server cert created with openvpn on
my laptop. I included the ---Begin Certificate portions)
Private Client Key. (copy/paste from client key 1)
Public Client Cert (Copy/paste from client cert)
On the PFsense
Protocol:UDP
Dynamip IP checked
Local Port 1194
Address Pool: 172.168.0.0/24
Local network: 192.168.2.0/24
Remote Network 192.168.20.0/24
Crypto BF-CBC 128bit
Authentication Method: PKI
Shared Key: Blank
CA Cert: copy paste of CA Cert created from above
Server Cert: copy/paste
Server Key: copy/paste
DH Parameters: copy/paste
CRL: Blank
Everything else blank
LZO Compression: checked
Description: OVPN
---------------------------------------------------------------------
To unsubscribe, e-mail: [email protected]
For additional commands, e-mail: [email protected]
Commercial support available - https://portal.pfsense.org
