I saw that OpenVPN allows that, I'm going to use OpenVPN for my dynamic users, I prefer it to PPTP, but I've always used IPsec for static VPN's. I now have Pfsense on both ends of most of my VPN's, is OpenVPN a good solution for static site-to-site VPN's?
Paul ________________________________ From: Tim Nelson [mailto:[email protected]] Sent: Friday, March 06, 2009 8:23 PM To: [email protected] Subject: Re: [pfSense Support] VPN into a network allowing access to two subnets? Use OpenVPN and push some routes out to your users. Tim Nelson Systems/Network Support Rockbochs Inc. (218)727-4332 x105 ----- "Chuck Mariotti" <[email protected]> wrote: > > I have a similar situation it sounds like to Paul. Specifically, I would like to setup pfSense to allow access to a 10.10.10.1 network to access other computers there. But I also need to allow the VPN users access to another subnet that hosts the telephone system (10.10.200.1). How can this be done? If so, how does one do this? Chuck > From: Borowicz, Paul [mailto:[email protected]] > Sent: Friday, March 06, 2009 11:23 AM > To: [email protected] > Subject: [pfSense Support] VPN routing I'm in the process of transitioning the subnet of my datacenter, I only have a dozen or so servers. Everything is currently on a nonstandard subnet (192.0.1.0/24) due to a previous network admin. I want to move everything to 10.97.0.0/24, but I have alot of VPN's that terminate into the datacenter on my pfsense firewall. I know you can't route VPN's, if I use a second interface on my pfsense box can I bridge those two subnets? Can someone give me a quick example? If that's not possible, should I just create a second VPN for each site that points to the other subnet? Since both subnets will have a port on the pfsense box I should be able to point an ipsec VPN at either one, right? thanks, Paul F. Borowicz Network Administrator Behavior Corp (317) 587-0521 [email protected]
