On Sat, Mar 7, 2009 at 6:38 PM, Tim Dressel <[email protected]> wrote: > We just migrated a few of our firewalls from m0n0wall to PFsense (cool > that that config files work btw devs!!!) > > Anyways, now I can't PPTP out to another firewall from behind one of > the new PF boxes (this was not a problem with m0n0wall). > > Some googling about found this from a few years back: > > http://forum.pfsense.org/index.php?topic=1110.msg8283 > > Does anyone know if this is still and issue, or is there a work around? >
>From >http://www.pfsense.org/index.php?option=com_content&task=view&id=40&Itemid=43 "Because of limitations in pf NAT, when the PPTP Server is enabled, PPTP clients cannot use the same public IP for outbound PPTP connections. This means if you have only one public IP, and use the PPTP Server, PPTP clients inside your network will not work. The work around is to use a second public IP with Advanced Outbound NAT for your internal clients. See also the PPTP limitation under NAT on this page." The Frickin package was resurrected recently and should be a solution for this, but hasn't yet been tested. --------------------------------------------------------------------- To unsubscribe, e-mail: [email protected] For additional commands, e-mail: [email protected] Commercial support available - https://portal.pfsense.org
