Brad Gillette wrote:
I am using pfSense as transparent briding firewall and overall is working pretty good and how I want it to work except for some traffic that is coming in on my LAN interace is being blocked by the 'default deny rule'. I'm allowing all traffic that is generated on the LAN side to leave. I see where some others have ran into a similar problem. I do run 2 different IP subnets on my LAN and a router on the WAN side of the pfSense box routes between. Some of the traffic between the 2 subnets is getting blocked and some gets passed just fine
This is typically a misconfiguration in your firewall rules. By default the LAN is in a default allow state. If you are bumping up against the default deny rule, then you are either using an OPT interface as a LAN, which is fine, just realize that all OPT interfaces come in a default deny state, and make your firewall rules accordingly.
--------------------------------------------------------------------- To unsubscribe, e-mail: [email protected] For additional commands, e-mail: [email protected] Commercial support available - https://portal.pfsense.org
