That's a good point. Where would I see if that was an issue? Thanks,
-Marty From: Fuchs, Martin [mailto:[email protected]] Sent: Thursday, March 26, 2009 5:11 PM To: '[email protected]' Subject: [pfSense Support] AW: Is there any reason I can't Remote desktop through an ipsec tunnel? Perhaps some kind of MTU issue ? RDP often has MTU issues ;-) Regards, Martin Von: Marty Nelson [mailto:[email protected]] Gesendet: Donnerstag, 26. März 2009 23:30 An: [email protected] Betreff: [pfSense Support] Is there any reason I can't Remote desktop through an ipsec tunnel? I have an IPSec tunnel connecting my network to one of our customer sites, and while I can ping a computer on their network I am unable to remote desktop to. Currently all of our customer tunnels are setup to terminate in our DMZ to limit access back into our network. I have a second firewall (monowall) in our DMZ that then routes all traffic out through the tunnel. I've drawn a rudimentary layout of how it's setup (see below). I have the IPsec rules to pass all traffic, and currently I have it setup to log all traffic as well. What's strange is that when I attempt to remote desktop to it, I see no traffic relating to that at all. Nothing passing, nothing getting blocked. Like I said, I can ping the box just fine (and it shows up in the log), but I am unable to remote desktop to it and I don't see anything getting blocked, or passed. Hopefully this made sense. If it's unclear, please let me know and I'll try my best to clear it up. LAN (192.168)---[pfSenseFW]---DMZ (10.100)---[monowall]---[ipsec tunnel to cust site]---Cust site Thanks, -Marty
