Date: Wed, 10 Jun 2009 12:11:21 -0400
From: [email protected]
To: [email protected]
Subject: RE: [pfSense Support] Multiwan suggestions before v. 2.0 ...
From: Tebano
epaminonda [mailto:[email protected]]
Sent: June 10, 2009 10:04 AM
To: [email protected]
Subject: RE: [pfSense Support]
Multiwan suggestions before v. 2.0 ...
> Date: Mon, 1 Jun 2009 23:13:00 -0400
> From: [email protected]
> To: [email protected]
> Subject: Re: [pfSense Support] Multiwan suggestions before v. 2.0 ...
>
> On Mon, Jun 1, 2009 at 3:59 AM, Tebano epaminonda
> <[email protected]> wrote:
> > Sorry, Guys.
> > I where discussing of limitation reported into the features of:
> >
> > Inbound Load Balancing
> >
>
> What exactly are you referring to?
>
> ---------------------------------------------------------------------
> To unsubscribe, e-mail: [email protected]
> For additional commands, e-mail: [email protected]
>
> Commercial support available - https://portal.pfsense.org
>
Well, to be honest, basically I'm not sure, so I suppose my problem comes from
this feature.
Here it's.
I've 2 isp with 2 different IP and routers.
So I've configured 2 pfsense in load balance and with carp between them
(internal and external, so I always has a single IP to manage with routes and
nats).
All works perfectly, if all ISP are working, or if I detach the WAN2-isp
connection.
But if I try to detach the first one, no-one is able to connect to the external
of pfsense;
the same pfsenses aren't able to connect to the internet.
I see (correctly!), into the "load balance" status that only half of
monitored IP are reachble, but if I try to traceroute them, or something else,
connection fails.
Like there was a rule that "link" only to default wan the outgoing
packets, so if it fails, no-one is able to go, on neither of 2 pfsense!
Has anyone experienced my same trouble?
Thanks to all.
Cheers.
Tebano.
See all the ways you can stay connected to
friends and family
Loadbalancing and carp are two completely
different things. I would suggest to shutdown your secondary (in carp) firewall
and troubleshoot your loadbalancing at your primary pfSense.
Eugene
---
Hi Eugene.Thanks for Your answer.Yes, I've just tried this way before write
here.I've shut down the secondary system and tried to detach the primary wan
with only one pfsense up.Same problem: no connection to the external
network...Thanks anyway.Cheers.Tebano.
_________________________________________________________________
Windows Live™: Keep your life in sync. Check it out!
http://windowslive.com/explore?ocid=TXT_TAGLM_WL_t1_allup_explore_012009
