Hi, Not, I've 3 Internet providers. Wan, Opt1, Opt2. Two DSL 12Mb/600k and one 4Mb/4Mb cable connection. This connect to Pfsense and Pfsense need to run LoadBalancer + MultiWAN and SQUID for LAN to get great internet access, content filter, etc. At 1.2.2 Multiwan with Squid not works.
My VPN router connect to Switch, and i need to setup ONLY on Pfsense define route when traffic goes from LAN 192.168.10.x to external network 192.168.100.x goes from VPN Router. At the moment work with Xincom loadbalancer but Only with two WAN. 2009/6/16 Christopher M. Iarocci <[email protected]> > Hi, > > > > I've this network setup > > > > 2009/6/16 Christopher M. Iarocci <[email protected]> > > *From:* francisco Alonso Espejo [mailto:[email protected]] > *Sent:* Sunday, June 14, 2009 2:31 PM > *To:* [email protected] > *Subject:* [pfSense Support] MultiWan + LoadBalance + FailOver + Squid > > > > Hi to all, > > > > I try to run MultiWan + LoadBalance + FailOver + Squid. > > > > I've two DSL lines 12Mb 1,2/600Kb Wan1, Wan2(opt1) and Opt2 4Mb down /4Mb > up Cable line. Running 1.2.2 I get this issues.. > > > > - Failover : Some times pfsense ping to DNS and this fail (why? internet > works fine.). I replace for Router-IP and sometimes fails too.. The > conection it's with a UTP Cable Router-WAN1, Router-Wan2. > > - LoadBalance works fine, i can define where HTTPS, SVN, SSH goes. But How > configure AltQ with this configuration? bw download/upload from wizzard? 12 > + 12 + 4 and 600 + 600 + 4000?. I don't know .. And i think ALTQ from > wizzard only works with WAN1??. > > > > - Squid not works at the moment with 1.2.2 under Multiwan Setup.. . I find > a patch but i think not works with loadbalancing.. It's 1.2.3RC1 supported? > I use pfsense on a Office i need to work fine. > > > > - I've a VPN with other Router connected to my LAN. My lan works with > 192.168.10.x and The router for the VPN uses 192.168.10.120. My traffic need > to redirect when goes to 192.168.100.x (the remote LAN over VPN) by > 192.168.10.120. How i can redirect it?. I don't want to replace my VPN > router for pfsense at the moment. > > > > Thanks for all. > > * * > > * * > > *[Christopher Iarocci] * > > *More information, maybe a network diagram and what type of VPN you are > even talking about. No one can answer your last question without that info. > * > > * * > > > > *[Christopher Iarocci] * > > *It appears you have 2 gateways. One you want regular traffic to go > through, one for the VPN. Is the VPN router connected directly to the > internet also? If I am assuming correctly, you want to do this:* > > * > http://expertanswercenter.techtarget.com/eac/expertAnswer/0,295208,sid63_gci1082821,00.html > * > > *A quick search in Google brought that up. YMMV depending on what OS your > clients have (the answer was related to Windows), but the concept is the > same.* > > *Please respond to the list, not to me directly. Others may be able to > help also, but can’t if you send to only me. I forwarded your last message > to the list for continuity.* > > *Chris* > > > > > > > > >
