I setup a pfSense embedded using 1.2.3 rc1. When I connect to the console port, I get
tcsetpgrpfailed, errno=25 message. I have not detected any issues with the unit. BTW, it's a Soekris NET4801 with a 256M SanDisk CF card. This one has the WAN doing PPPoE for our office DSL and using LAN for an internal 192.168.250.x subnet and the OPT1 nic connected to 209.172.152.0/24 network. (I have a small ISP network that has a /24 assigned from our upstream provider. But wanted to keep the bandwidth hogs off that bandwidth and give them a separate DSL to abuse. It has worked well for our business.) I have two Soekris units here and only this one facing the DSL and doing PPoE shows this issue. The other unit is not using the third nic and is used primarily as a VPN server for offsite maintanence. It's configured with static IP's on the LAN and WAN interfaces. Thanks, Lyle Giese LCR Computer Services, Inc. --------------------------------------------------------------------- To unsubscribe, e-mail: [email protected] For additional commands, e-mail: [email protected] Commercial support available - https://portal.pfsense.org
