On Fri, Jul 24, 2009 at 6:11 PM, Victor Padro<[email protected]> wrote: > On Fri, Jul 24, 2009 at 5:59 PM, Joseph L. > Casale<[email protected]> wrote: >>>yes but becareful with that rule, it allows anyone in the LAN to >>>access anything in the internet and the OPT1, did you check the tagged >>>ports and the untagged ones, as I stated in a previous email? >> >> Ok guys, I am waiting on Chris to get some paid support. In the meantime >> I reconfigured some hardware and ran some tests. >> >> No more vlan config inside pfSense, I have 3 physical interfaces, lan, wan, >> opt1. >> wan is segmented off to a dsl which works, nat with lan is functioning. Opt1 >> is >> on a port that untags into vlan3. I *know* this works as I just hooked up a >> rhel >> host with an IP in the vlan 3 subnet that *does not* have vlan config and it >> can >> see hosts in vlan3. Opt1 has an ip in the vlan3 subnet but still no >> connectivity. >> >> My rules are lan->* and opt1->*. >> >> I have no gateway configured on Opt1, no bridging, clients in vlan3 have >> their >> gateway set to opt1's ip which is set to 192.168.2.1/32. >> >> What else can I check? >> >> Thanks for everything! >> jlc >> > > I stated before in order to test connectivity with the opt1 whether is > a vlan or a physical interface I enable the DHCP server and connect my > laptop, why don't you try to do this? > > Again, are you sure your switch is configured correctly? Meaning if > the ports are currently tagged/untagged, my setup is like this: > > ports 1-12 - LAN clients/no tagging > ports 13-24 - VLAN3/untagged - OPT1 clients > ports 26 - LAN/VLAN3/tagged(this is the port that is connected to the > em1 interface > port 25 - cascading port - LAN > > Hope it helps. > > > -- > Usuario Linux Registrado #452368 > Usuario Ubuntu Registrado #28025 > > "Doing a thing well is often a waste of time." > ---------------------------------------------------------------------------------------------------------------------------------- > //Netbook - HP Mini 1035NR 2GB 60GB - Windows XP/Ubuntu 9.04 > //Desktop - Core 2 Duo 1.86Ghz 8GB 500GB - Windows 7(testing) > //Desktop - Core 2 Duo 2.40Ghz 8GB 320GB - MacOS Leopard > //Desktop - Athlon 64 2.7Ghz 8GB 400GB - Ubuntu Jaunty > //Server - Pentium D 3.2Ghz 8GB 1TB - Debian Lenny > //Server - Celeron 1.8Ghz 1GB 160GB - Pfsense > //Server - NSLU2 266Mhz 32MB 1TB - Debian Lenny >
OT: BTW, you are subscribed into the CentOS mailing list, right? somehow your name was known for me :) cheers. -- Usuario Linux Registrado #452368 Usuario Ubuntu Registrado #28025 "Doing a thing well is often a waste of time." ---------------------------------------------------------------------------------------------------------------------------------- //Netbook - HP Mini 1035NR 2GB 60GB - Windows XP/Ubuntu 9.04 //Desktop - Core 2 Duo 1.86Ghz 8GB 500GB - Windows 7(testing) //Desktop - Core 2 Duo 2.40Ghz 8GB 320GB - MacOS Leopard //Desktop - Athlon 64 2.7Ghz 8GB 400GB - Ubuntu Jaunty //Server - Pentium D 3.2Ghz 8GB 1TB - Debian Lenny //Server - Celeron 1.8Ghz 1GB 160GB - Pfsense //Server - NSLU2 266Mhz 32MB 1TB - Debian Lenny --------------------------------------------------------------------- To unsubscribe, e-mail: [email protected] For additional commands, e-mail: [email protected] Commercial support available - https://portal.pfsense.org
