Roberto Greiner wrote:
Chris Buechler wrote:
On Wed, Oct 14, 2009 at 2:28 PM, Roberto Greiner
<[email protected]> wrote:
At beginning of the file I have the following:
failover peer "dhcp0" state {
my state normal at 3 2009/10/14 14:23:17;
partner state normal at 3 2009/10/14 14:13:17;
}
lease 172.16.89.254 {
starts 3 2009/10/14 17:04:35;
ends 3 2009/10/14 19:04:35;
tsfp 3 2009/10/14 20:04:35;
atsfp 3 2009/10/14 20:04:35;
cltt 3 2009/10/14 17:04:35;
binding state active;
next binding state expired;
hardware ethernet 00:0a:e4:5e:b5:a3;
}
That IP is for the notebook I'm using for setup.
After that, there are thousand of entries like the following:
lease 172.16.255.254 {
starts 3 2009/10/14 14:08:33;
binding state backup;
}
All those failover entries on that big of a scope exhaust PHP's memory
limit. No way around that for the time being, I opened a bug ticket
but you won't see that fixed in 1.2.x at least. Either use a smaller
scope, or use something else as your DHCP server. Or send patches to
fix the problem. :)
Ok,
as soon as possible I will try using a smaller scope.
Tks.
Roberto
It worked. I reduced the range to 172.16.50.0-172.16.60.254, and now the
"ntp servers" configuration no longer gives any problem.
Tks a lot.
Roberto
--
-----------------------------------------------------
Marcos Roberto Greiner
Os otimistas acham que estamos no melhor dos mundos
Os pessimistas tem medo de que isto seja verdade
James Branch Cabell
-----------------------------------------------------
---------------------------------------------------------------------
To unsubscribe, e-mail: [email protected]
For additional commands, e-mail: [email protected]
Commercial support available - https://portal.pfsense.org
