Ron Lemon wrote:
Hi Chris and Keenan,
It is still not working so this is exactly what I have. I don't usually
post all the live IPs but at this point I just need it to work.
Windows 2K3 Server (no firewall) 10.0.3.1
This guy needs to receive LDAP and SMPT traffic from OPT1 Interface
LAN Rules:
Proto Source Port Dest Port GW
Sched
TCP * * 142.46.226.22 25 142.47.56.89
TCP * * 142.46.226.24 389 142.47.56.89
TCP * * 10.250.223.148 389 142.47.56.89
* LAN net * * * *
OPT1 Rules:
TCP 142.46.226.24 * 10.0.3.1 389 142.47.56.89
TCP 10.250.223.148 * 10.0.3.1 389 142.47.56.89
TCP 142.46.226.22 * 10.0.3.1 25 142.47.56.89
ICMP * * * * *
TCP 142.46.226.16 * LAN net * 142.47.56.89
OPT1 is on a private network with ip of 142.47.56.90/28 with GW of
142.47.56.89
>From a workstation I can successfully telnet out to 142.46.226.22:25 but I
cannot telnet to either of the 389 addresses
When they try and telnet to me I do see traffic in my FW capture from them
on OPT1 for 389 but it never gets passed to the inside machine.
This is driving me nuts and I am sure I am missing something simple, please
any help is appreciated.
I do not think you need to specify gateway in OPT1 rules, make it default.
Then, you have to set up port forward nat on OPT1, so traffic destined
to 142.47.56.90:389 should be forwarded to 10.0.3.1. When you create
this forwarding proper rules will be created automatically.
If I understand your task correctly...
---------------------------------------------------------------------
To unsubscribe, e-mail: [email protected]
For additional commands, e-mail: [email protected]
Commercial support available - https://portal.pfsense.org
