On Tue, Nov 10, 2009 at 1:50 AM, Lenny <[email protected]> wrote: > Lenny wrote: > > Scott Ullrich wrote: > > On Mon, Nov 9, 2009 at 3:45 PM, Scott Ullrich <[email protected]> wrote: > > > Contact me off list. I have a kernel I need you to test. > > > In the meantime, please try increasing these sysctl's: > > pfSense:~# sysctl -a | grep rx_processing_limit > dev.em.0.rx_processing_limit: 100 > dev.em.1.rx_processing_limit: 100 > dev.em.2.rx_processing_limit: 100 > dev.em.3.rx_processing_limit: 100 > > Try increasing each to 256, then 512, 1024, 2048, etc. > > If these do not help contact me for a new kernel. > > Scott > > --------------------------------------------------------------------- > To unsubscribe, e-mail: [email protected] > For additional commands, e-mail: [email protected] > > Commercial support available - https://portal.pfsense.org > > > > > Hi Scott, > > Actually, I have them set on a 1000 for quite a while now. Before I did that > I had errors on interfaces. Do you still want me to increase to 2048 and > more? > > Thanks, > > Lenny. > > At second thought, to get rid of the errors I told you about, I did 2 > things: > added this to /boot/loader.conf: > hw.em.rxd="4096" > hw.em.txd="4096" > > and added to /etc/sysctl.conf: > dev.em.0.rx_processing_limit=1000 > dev.em.1.rx_processing_limit=1000 > > plus, I changed > net.inet.ip.intr_queue_maxlen=4096 > > and added > kern.ipc.somaxconn=1024 > > These were the changes I did outside of the WebGUI. > > So should I still increase the dev.em.X.rx_processing_limit value?
Also let me know what this sysctl is showing: net.inet.ip.intr_queue_drops If it shows >0 then you might want to increase net.inet.ip.intr_queue_maxlen Scott --------------------------------------------------------------------- To unsubscribe, e-mail: [email protected] For additional commands, e-mail: [email protected] Commercial support available - https://portal.pfsense.org
