Hello,
Is anybody running pfSense on an alix1c, alix1d or alix3c3 ? (the types
with 1 NIC and VGA/USB)
I've been using pfSense on these types of alix boards for a while now,
in setups with VLANs on the onboard NIC or a wireless card in the mpci
slot as a second NIC.
I found out the nanobsd version 1.2.3-RC3 doesn't boot on them, gets
stuck at "Starting device manager (devd)..."
Same CF works fine on an alix2c3.
All test boards are running latest BIOS version, even tested with
various other BIOS versions.
I've just tested the latest snapshots available for 1.2.3 and 2.0 as
well, they don't boot either.
More details are in the forum post at
http://forum.pfsense.org/index.php/topic,20405.msg107742.html
Sorry for posting on both the forum and the mailinglist, but the forum
thread didn't get any answers in the last 2 weeks, and I feel this issue
is important enough to make sure it got noticed.
If however this is not a priority for the pfSense team, just say so and
I'll stop whining :-)
Regards,
Hans
---------------------------------------------------------------------
To unsubscribe, e-mail: [email protected]
For additional commands, e-mail: [email protected]
Commercial support available - https://portal.pfsense.org
