I have a SIP solution behind pfSense now (this morning it was sitting behind a monowall setup on a pentium3 computer). PfSense being installed on an Alix 2D13 now, opened up ports 5060 tcp/udp and the SIP device (an SPA-2102) registers every 180 seconds.
But the ip-state is being deleted every 60 seconds... and this is every 180 seconds so. Ok, I can lessen the amount of time between registers, but what bothers me that this worked without a configuration-change (besides NAT ofcourse) on a monowall setup. Can I prolong the time of a certain state (for instance, only SIP traffic ?)... I already tried it within RULES, in the Advanced - there is a state-timeout... but setting this to 240 doesn't seem to help... I did this on both LAN outgoing, as on WAN incoming 5060. I'll install the sipproxd package, if this would solve things, but this sounds to me that it would only solve issues when using multiple SIP devices behind NAT... Any thoughts ? Kind regards, Michel Servaes --------------------------------------------------------------------- To unsubscribe, e-mail: [email protected] For additional commands, e-mail: [email protected] Commercial support available - https://portal.pfsense.org
