Assuming Comcast gave you a contiguous netblock, your netblock would be *.*.0.192-207 (192 being the network address and 207 being the broadcast) leaving 193-206 as usable IP addresses. *.*.0.175 isn't in that net block and so its not likely that its available for you to use.
Adam Van Ornum wrote:
Ok, I am pretty inexperienced with IP addressing, particularly when it comes to configuring firewalls with multiple public IPs, but at my small business I'm the most experienced with IT stuff in general so I get to be the one who deals with all this stuff. We have Comcast as our internet provider with a range of public IPs of which we are currently only using one. I'd like to be able to use another public IP in order to expose more services, such as a separate mail or web server.

Comcast provided public IPs: *.*.0.206/28
Current WAN IP: *.*.0.193/28
Current WAN Gateway: *.*.0.206

This was setup with a different firewall (a crappy consumer box) before I got here, so after I started I switched over to pfSense and just used the settings that were in the old box. Currently, everything is working fine with this setup but now I am trying to set things up so I can use another public IP (ie *.*.0.175) to expose different web and mail services hosted on a different internal server and I can't get it to work.

What I have tried is to add a virtual IP (I've tried both Proxy ARP and Other) with the following settings:

Interface: WAN
IP Address: *.*.0.175/32

And I then setup 1:1 NAT mapping *.*.0.175/32 to 192.168.100.10.
Lastly, I create a firewall rule on the WAN interface to allow port 80 where the destination is 192.168.100.10.

However, this does not seem to work...what am I missing?

------------------------------------------------------------------------
Hotmail: Trusted email with Microsoft’s powerful SPAM protection. Sign up now. <http://clk.atdmt.com/GBL/go/196390706/direct/01/>


---------------------------------------------------------------------
To unsubscribe, e-mail: [email protected]
For additional commands, e-mail: [email protected]

Commercial support available - https://portal.pfsense.org

Reply via email to