Danny wrote:
Hi,
I´ve got to pfsense 1.2.3 boxes (CARPed), and I´m experiencing issues
accessing from the outside to the inside using PAT. (From WAN to OPT2)
I don´t think the problem are rules, becasue sometimes works and
sometimes not
I tcpdumped the traffic, and it seems is working but sometimes not...
I also parse the log
First try connection, dropped
May 6 18:20:19 block em1 TCP 88.215.163.167:55944
<http://88.215.163.167:55944> 192.168.212.171:22
<http://192.168.212.171:22>
Second try connection timed out
May 6 18:30:09 pass em1 TCP 88.215.163.167:56122
<http://88.215.163.167:56122> 192.168.212.171:22
<http://192.168.212.171:22>
Third try, dropped (but the intial prompt was seen)
May 6 18:35:24 block em1 TCP 88.215.163.167:55944
<http://88.215.163.167:55944> 192.168.212.171:22
<http://192.168.212.171:22>
PAT Rules are ok. Access rules ok, but sometimes I see dropped the
traffic by default rule, when a couple of rules below there are a
explicit rule to permit the traffic WAN and LAN
PAT for 88.215.163.167 to SSH is 22171 > 192.168.212.171 port 22
Any clue?
(Obviously IPs are fictitious)
--
dpc
Isn't 192.168.212.171 OPT's IP by chance?
<http://192.168.212.171:22>
---------------------------------------------------------------------
To unsubscribe, e-mail: [email protected]
For additional commands, e-mail: [email protected]
Commercial support available - https://portal.pfsense.org
