Hi Kai, On 05/07/2010 10:47 AM Kai Szymanski wrote: > I wan't to go from a "self made" linux router to pfsense because there > are several features i wan't to user (f.e. failover). On the old router > there is a openvpn-server running for roadwarriors. Is it possible to > import the certificates (server and clients) into pfsense ?
for sure this is possible! You can just port your server configuration to pfsense (server certificate and private key and also the ca certificate) via the VPN -> OpenVPN Tab. The configuration will gets written to the following files: <------------------------------- /var/etc/openvpn_server0.ca /var/etc/openvpn_server0.cert /var/etc/openvpn_server0.conf /var/etc/openvpn_server0.dh /var/etc/openvpn_server0.key /var/etc/openvpn_server0.tls -------------------------------> Btw. don't try to change the content of this files by hand because they will get overwritten everytime the configuration is being reloaded. After porting your configuration to your pfsense box you would like to add a rule to your WAN interface which allows traffic to pass to the vpn port according to your configuration. Then you're all set and your roadwarriors shall be able to connect again :-) jan --------------------------------------------------------------------- To unsubscribe, e-mail: [email protected] For additional commands, e-mail: [email protected] Commercial support available - https://portal.pfsense.org
