I have a pfsense 1.2.3 at the office thats been running well. At home I setup a monowall on a retired Watchguard x500. Monowall version 1.32. Trying to get a tunnel going between the 2 locations. The office is on a static ip, The house I setup a dyndns account. Both sides I have verified the settings are the same. I have tried 3DES/SHA1 and blowfish. It was working for a few days and nothing was changed except for a reboot. Now the tunnel does not come backup with the below error message on the monowall side. Get error messages on the pfsense side that are similiar to this. The office pfsense does have mobile ipsec clients set if that makes a difference. I have also made sure the PSK that i put in does not match anything on the mobile client side just incase that caused issues.
Jun 14 02:11:58racoon: ERROR: such policy already exists. anyway replace it: 192.168.30.0/24[0] 192.168.2.0/24[0] proto=any dir=outJun 14 02:11:58racoon: ERROR: such policy already exists. anyway replace it: 192.168.30.1/32[0] 192.168.30.0/24[0] proto=any dir=outJun 14 02:11:57racoon: ERROR: such policy already exists. anyway replace it: 192.168.2.0/24[0] 192.168.30.0/24[0] proto=any dir=inJun 14 02:11:57racoon: ERROR: such policy already exists. anyway replace it: 192.168.30.0/24[0] 192.168.30.1/32[0]proto=any dir=inJun 14 02:11:57racoon: INFO: 192.168.30.1[500] used for NAT-TJun 14 02:11:57racoon: INFO: 192.168.30.1[500] used as isakmp port (fd=11)Jun 14 02:11:57racoon: INFO: 10.10.30.1[500] used for NAT-TJun 14 02:11:57racoon: INFO: 10.10.30.1[500] used as isakmp port (fd=10)Jun 14 02:11:57racoon: INFO: 127.0.0.1[500] used for NAT-TJun 14 02:11:57racoon: INFO: 127.0.0.1[500] used as isakmp port (fd=9)Jun 14 02:11:57racoon: INFO: ((Office WAN IP))[500] used for NAT-TJun 14 02:11:57racoon: INFO: ((Office WAN IP))[500] used as isakmp port (fd=8) I would love to get the tunnel backup with both networks that are in the office but not sure where to start right now. I have checked the documentation on the pfsense forums on a site to site between 2 pfsense boxes and thus the monowall should be the same since it is fork of that. Thank you in advance.
