On 19/10/10 13:36, Vincent Hoffman wrote:
>  On 19/10/2010 12:32, Paul Mansfield wrote:
>> On 15/10/10 18:15, Gavin Spurgeon wrote:
>>> Does pfSense support the RTL8100CL Nic ?
>> possibly yes, possibly no
>>
>> a year ago I used a dell vostro 220 as a firewall for a satellite
>> office, the realtek onboard interface worked fine
>>
>> then I used a vostro 230, and freebsd refused to recognise the onboard
>> realtek at all; the box ran windows fine as that's what Dell shipped it
>> with.
>>
>> if I knew the equivalent of linux's "lspci" I could tell you what it is.
> 
> For FreeBSD/pfsense try pciconf -lv

thanks. OK, here's the machine whose realtek network adaptor doesn't
work. fortunately I'd taken a pair of intel cards with me, since I was a
long way from "home", these are thus the em0 and em1 devices.

# pciconf -lv
hos...@pci0:0:0:0:      class=0x060000 card=0x043e1028 chip=0x2e308086
rev=0x03 hdr=0x00
    class      = bridge
    subclass   = HOST-PCI
vgap...@pci0:0:2:0:     class=0x030000 card=0x043e1028 chip=0x2e328086
rev=0x03 hdr=0x00
    class      = display
    subclass   = VGA
no...@pci0:0:27:0:      class=0x040300 card=0x043e1028 chip=0x27d88086
rev=0x01 hdr=0x00
    class      = multimedia
    subclass   = HDA
pc...@pci0:0:28:0:      class=0x060400 card=0x043e1028 chip=0x27d08086
rev=0x01 hdr=0x01
    class      = bridge
    subclass   = PCI-PCI
pc...@pci0:0:28:1:      class=0x060400 card=0x043e1028 chip=0x27d28086
rev=0x01 hdr=0x01
    class      = bridge
    subclass   = PCI-PCI
pc...@pci0:0:28:2:      class=0x060400 card=0x043e1028 chip=0x27d48086
rev=0x01 hdr=0x01
    class      = bridge
    subclass   = PCI-PCI
uh...@pci0:0:29:0:      class=0x0c0300 card=0x043e1028 chip=0x27c88086
rev=0x01 hdr=0x00
    class      = serial bus
    subclass   = USB
uh...@pci0:0:29:1:      class=0x0c0300 card=0x043e1028 chip=0x27c98086
rev=0x01 hdr=0x00
    class      = serial bus
    subclass   = USB
uh...@pci0:0:29:2:      class=0x0c0300 card=0x043e1028 chip=0x27ca8086
rev=0x01 hdr=0x00
    class      = serial bus
    subclass   = USB
uh...@pci0:0:29:3:      class=0x0c0300 card=0x043e1028 chip=0x27cb8086
rev=0x01 hdr=0x00
    class      = serial bus
    subclass   = USB
eh...@pci0:0:29:7:      class=0x0c0320 card=0x043e1028 chip=0x27cc8086
rev=0x01 hdr=0x00
    class      = serial bus
    subclass   = USB
pc...@pci0:0:30:0:      class=0x060401 card=0x043e1028 chip=0x244e8086
rev=0xe1 hdr=0x01
    class      = bridge
    subclass   = PCI-PCI
is...@pci0:0:31:0:      class=0x060100 card=0x043e1028 chip=0x27b88086
rev=0x01 hdr=0x00
    class      = bridge
    subclass   = PCI-ISA
atap...@pci0:0:31:2:    class=0x01018f card=0x043e1028 chip=0x27c08086
rev=0x01 hdr=0x00
    class      = mass storage
    subclass   = ATA
no...@pci0:0:31:3:      class=0x0c0500 card=0x043e1028 chip=0x27da8086
rev=0x01 hdr=0x00
    class      = serial bus
    subclass   = SMBus
e...@pci0:2:0:0: class=0x020000 card=0xa01f8086 chip=0x10d38086 rev=0x00
hdr=0x00
    class      = network
    subclass   = ethernet
no...@pci0:3:0:0:       class=0x020000 card=0x043e1028 chip=0x169114e4
rev=0x01 hdr=0x00
    class      = network
    subclass   = ethernet
e...@pci0:4:1:0: class=0x020000 card=0x13768086 chip=0x107c8086 rev=0x05
hdr=0x00
    class      = network
    subclass   = ethernet

---------------------------------------------------------------------
To unsubscribe, e-mail: [email protected]
For additional commands, e-mail: [email protected]

Commercial support available - https://portal.pfsense.org

Reply via email to