On 10 November 2010 17:24, st41ker <[email protected]> wrote: > Hello again, > > Little fix just add '/sbin' path to binary just to make sure that init > subsystem will run it: > > echo "/sbin/swapon /dev/ad1s1" > /usr/local/etc/rc.d/startup.sh ; chmod +x > /usr/local/etc/rc.d/startup.sh; reboot
Thank you, this seems to have worked. I have rebooted the box and ssh'd back in, swapinfo shows the swap partition as active . On 10 November 2010 18:12, Adam Thompson <[email protected]> wrote: > Ah, I had interpreted it as he installed a box without swap and was now > trying to add it. That is correct. Originally I set the box up with no swap. I haven't deployed the box into production yet and whilst testing and tinkering I keep getting close to my physical memory limits so I wanted to add some swap space temporarily and when its comes to deployment, if needs be I can chuck some more RAM in. Thanks to all, this is now sorted :D -- Regards, James. http://www.jamesbensley.co.cc/ There are 10 kinds of people in the world; Those who understand Vigesimal, and J others...? --------------------------------------------------------------------- To unsubscribe, e-mail: [email protected] For additional commands, e-mail: [email protected] Commercial support available - https://portal.pfsense.org
