I use Engenius equipment quite often. They support a management interface and up to 4 SSIDs all controlled with VLAN tagging. ------Original Message------ From: Fred Boiteux To: [email protected] ReplyTo: [email protected] Subject: Re: [pfSense Support] how to manage 2 subnets for LAN ? Sent: Nov 18, 2010 2:39 PM
Le Thu, 18 Nov 2010 14:10:18 +0100, Seth Mos <[email protected]> a écrit : > Hi, > > > As we use an Alix 2d3 board with 3 ethernet interfaces, there is > > one free at now : could we use this OPT interface to manage backbone > > network, with an address in its subnet 192.168.1.0/24, and put an > > address from 192.168.2.0/24 subnet on the LAN interface to serve > > clients, provided these two LAN and OPT will be connected through a > > switch to the first antenna of the backbone where all traffic is > > passing ? > > I think you want a managed switch that has vlan support. You can then > use the 3rd port on the alix for connecting all the vlans. The different LAN subnets' trafic aren't VLAN tagged, and all traffic comes from one Ethernet port (from the nearest antenna), so I don't understand how VLAN could be used there ? Fred. --------------------------------------------------------------------- To unsubscribe, e-mail: [email protected] For additional commands, e-mail: [email protected] Commercial support available - https://portal.pfsense.org -- Kevin Tollison Sent from my Blackberry
