--- El lun, 6/12/10, Evgeny Yurchenko <[email protected]> escribió:
De: Evgeny Yurchenko <[email protected]> Asunto: Re: [pfSense Support] NATed SMTP server shows WAN IP Para: [email protected] Fecha: lunes, 6 de diciembre, 2010 07:17 On 10-12-06 01:13 AM, el caballo wrote: HI Guys! I have a mailserver that is setup to be NATed to a Private IP and configured to have its own Public IP. The Public IP is a Virtual IP (Proxe ARP). And on the Firewall: NAT: Outbound, AON is selected. It is working correctly with one thing seem to be wrong. We are able to connect to the SMTP servers Public IP but it seem to be connecting to outside SMTP servers using the Firewall WAN IP and not the specified SMTP IP on the Virtual IP. Pleae let me know if there is something that I missed, or how can I enable it to send emails out using its assigned Public IP. The pfsense version im using is 1.2.3-RELEASE. Many thanks ! Make sure in "Outbound NAT" the rule with the source IP of your SMTP-server is located higher than all other general rules. Evgeny. Hi Evgeny, Thank you for the quick response. However, its still not working after moving the the rule higher. Below are the rules on "Outbound NAT". WAN 192.168.24.0/24 * * * * * NO Auto created rule for DMZ WAN 192.168.20.0/24 * * * * * NO Auto created rule for LAN Below are is the port forward rule for the SMTP. WAN TCP 25 (SMTP) Arwen (ext.: xxx.xxx.xxx.219) 25 (SMTP) But SMTP servers we send to see our SMTP server as xxx.xxx.xxx.222 which is the WAN IP. Many thanks again! --------------------------------------------------------------------- To unsubscribe, e-mail: [email protected] For additional commands, e-mail: [email protected] Commercial support available - https://portal.pfsense.org
