OPT1 as wan (public IP and gateway ) i can ping from out side.first i need to configure the connection right? then NAT ing and all these...
i cant make any ping from GUI choosing OPT1 as interface On Fri, Jan 14, 2011 at 11:03 AM, David Burgess <[email protected]> wrote: > On Thu, Jan 13, 2011 at 10:29 PM, Shali K.R. <[email protected]> > wrote: > > Dear all, > > > > I have 2 WAN ( Static and another PPPOE )connections and a LAN connection > > > > > > i added PPPOE as WAN and static as OPT1 two connections are active and i > > added a firewall rule for OPT1 allow all to all then i check the > > connectivity of OPT1, i can ping to OPT1 from out side but cant ping from > > OPT1 to anywhere, any idea??/ > > You said OPT1 is a WAN with static IP, so I assume you configured it > with a gateway. If you didn't turn off automatic outbound NAT then > OPT1 will not accept any LAN-destined traffic unless you define port > forward rules. > > Alternately, you could turn off AON if your LAN is in public IP > address space (or if one of your WANs is). > > db > > --------------------------------------------------------------------- > To unsubscribe, e-mail: [email protected] > For additional commands, e-mail: [email protected] > > Commercial support available - https://portal.pfsense.org > > -- Thanks & Regards Shali K R Server Administrator Vidya Academy of Science & Technology Thrissur,Kerala. Mob:9846303531
