On 3/4/2011 9:59 AM, Moshe Katz wrote: > I currently have two pfSense boxes with Intel Gigabit cards. The first > is a Dell Optiplex gx270 (Pentium 4, 512mb RAM). It has one built-in > Intel Gigabit port and two dual-port PCI cards. This gives me em0 - > em4. As far as I can tell, this box is working perfectly. The second > is also a gx270 with one built-in gigabit port. It has another > single-port Intel Gigabit card and a generic 10/100 card whose name I > can't find that shows up as fxp0. > > I am now trying to set up a third box. It is a Dell Optiplex gx240. It > has an on-board 3Com 3C920-based 10/100 port. I added a dual-port Intel > card (the same one as the first box). Using em1 of that card works fine > but when I plug in em0, I start getting "em0: Watchdog Timeout" messages > on the console. > > What should I look at to troubleshoot this? Is it a problem with the > network card?
Is this on a 2.0 snapshot? If so, what date? Since the switch to the Yandex Intel drivers a couple days ago my VMs all constantly print watchdog timeouts on the console... It seems to operate OK, but it makes the console useless. Jim --------------------------------------------------------------------- To unsubscribe, e-mail: [email protected] For additional commands, e-mail: [email protected] Commercial support available - https://portal.pfsense.org
