Hi, The way I understood it, you are trying to redirect INTERNAL computers that try to access 74.125.224.214 to your server but allow your server access to that IP.
There is no easy way to do this in 1.2.x. However, in 2.0, you should be able to do this with Port Forwarding. Try a Port Forward Rule similar to the following: - Interface: LAN - Source: NOT <Your Server IP> - Dest: 74.125.224.214 - Dest. Port Range: an alias that contains 80 and 443 - Redirect Target IP: <Your Server IP> - Redirect Target Port: Same alias as above Moshe ------------------------------ Moshe Katz -- [email protected] -- +1(301)867-3732 On Thu, Mar 10, 2011 at 8:44 PM, Anthony Saenz <[email protected]>wrote: > Hi, > > I'm new to pfsense and so far haven't found a way to do the following: > > I'm trying to route traffic on ports 80/443 going to a "public" IP (in this > case let's say 74.125.224.214) to a box we have internally here in the > office but if that box itself tries to hit the IP, allow it to pass through > to the intended destination. Is this at all possible or is there another > medium that would allow me to do this? > > Thanks! > > --------------------------------------------------------------------- > To unsubscribe, e-mail: [email protected] > For additional commands, e-mail: [email protected] > > Commercial support available - https://portal.pfsense.org > >
