On Fri, Mar 18, 2011 at 4:15 PM, Joseph L. Casale <[email protected]> wrote: > I have to transfer a config from one server to another. Looking at the backup > I can replace the ifnames and correlate the vlans etc but I am wondering about > the nat/filter pair id's or any other caveats?
I have moved a config back and forth between a pair of 2.0 machines. One is i386 embedded and the other amd64 full. All I changed in the config was ifnames (don't do a 'replace all' if you have rrd data in the backup!). You may also need to adjust other settings that might affect things like RAM, DMA, checksum offloading, polling, powerd, etc if your hardware is different in those respects. db --------------------------------------------------------------------- To unsubscribe, e-mail: [email protected] For additional commands, e-mail: [email protected] Commercial support available - https://portal.pfsense.org
