Hello, I use PfSense 1.2 since 2-3 years with good results on 2 WAN access, and I recently tried to use the 2.0beta5 image to be able to use Multi-WAN setup with PPPOE modems (starting with 2), following "Multi-Wan on a Stick" model described in the book. I had some difficulties as load balancing/failover setup has changed between 1.2 version and new 2.0 (but I need 2.0 for multi-PPPOE WAN), but it almost works. I've noticed 2 problems I can't find solution on the web :
* local services, as ntpd daemon, but also a ping initiated from PfSense's console, don't work : for example : [2.0-BETA5][[email protected]]/root(1): ping www.pfsense.org PING pfsense.org (69.64.6.21): 56 data bytes ping: sendto: No route to host ping: sendto: No route to host There is no default gateway, and I din't found a way to set it up in a multi-wan configuration : how can I do this ? * most LAN to Internet connexions work (http, pop, smtp, ssh, openvpn...), but I've noticed a very strange problem : I can't use X11-forward ssh connection, it blocks : $ ssh -vv -Y <my-external-host> rxvt ... debug1: Sending command: rxvt debug1: client_input_channel_open: ctype x11 rchan 4 win 65536 max 16384 debug1: client_request_x11: request from 127.0.0.1 54400 debug1: channel 1: new [x11] debug1: confirm x11 And then the connection is blocked. If I use a path through another WAN (with "classical" PfSense 1.2 mono-WAN), it works well. I'm puzzled, I don't understand what can do this ?! Thanks for your help, Fred. --------------------------------------------------------------------- To unsubscribe, e-mail: [email protected] For additional commands, e-mail: [email protected] Commercial support available - https://portal.pfsense.org
