On 3/26/2011 9:53 PM, - Dickie Bradford - wrote:
Today I installed a New 2.0 RC1 pfsense build and then installed my
backup config from 1.2.3. It went pretty well with minor issues that
were easily fixed. One issue that is not easily fixed is this.... I
have 3 interfaces, WAN (DHCP), LAN (192.168.20.1) and WirelessLan
(192.168.21.1). WAN and LAN work perfect, the WirelessLan is acting
strange to the fact that from the lan i can only ping a fewl of the
active 192.168.21.0/24 address's ...BUT... I can ping all the active
address's from the firewall with no problem.
example:
firewall can ping: 192.168.21.2, 192.168.21.3, 192.168.21.48,
192.168.21.49, 192.168.21.223
Lan & IPSEC can only ping: 192.168.21.48, 192.168.21.49
I have the rule to pass everything on all interfaces just for the sake
of trying to track this issue down. BOGON's and Private IP blocking
are unchecked on all interfaces.
I am at a loss of what is wrong
Thnx
Here is some additional information on this
only IP's directly connected to the switch that is connected to the
pfsense box cannot be pinged from lan or ipsec, but remote IP's that
run accross wireless brigdes thru the switch can be pinged. I have
changed the switch to make sure it is not an issue, but the problem
still persists.
Dickie
--
Dickie Bradford
Never-Enuff Internet
D12 Networks
P.O.Box 426
Colver, Pa 15927-0426
http://www.Never-Enuff.net
http://www.D12Networks.com
Toll Free: 1-800-647-3145
Local: 814-569-1934
The man who sais it cannot be done, should not interupt
the man who is trying to do it!
---------------------------------------------------------------------
To unsubscribe, e-mail: [email protected]
For additional commands, e-mail: [email protected]
Commercial support available - https://portal.pfsense.org
