Hi Frank! Am 24.05.2011 um 09:57 schrieb Frank Heydlauf:
> On Mon, May 23, 2011 at 11:24:48PM +0200, Andreas Kaiser wrote: > .. >> A Vmware host machine has 1 NIC and uses 1 public IP itself. >> A second public IP (say 4.3.2.17/32) is used for the pfSense VM's >> WAN interface. The provider is routing a /24 (say 1.2.3.0/24) on >> that second IP. > > > let's draw a chart (use monospaced font!): > > ISP > | > | > | > 4.3.2.17 > WAN > pfSense > NAT+Filter > LAN OPT1 > 1.2.3.1/26 1.2.3.129/25 > | | > | | <-- VMware virtual switch > | | > 1.2.3.5 1.2.3.155 (for example) > eth0 eth1 > Webserver > > ist this correct? This is absolutely correct, except that I'm using separate switches (vSwitch1, vSwitch2) for LAN/eth0 and OPT1/eth1. I'm not sure what you mean by "NAT+Filter" – there isn't any NAT related stuff configured at all. > And the default-route of "Webserver" goes to 1.2.3.1 ? Yes. > Ist the /24 your provider assigned to you routed to 4.3.2.17 or is 4.3.2.17 > part of that /24 ? It's just routed to 4.3.2.17. To be more specific WAN is 4.3.2.17/27 with it's gateway being 4.3.2.1/27. This gateway is tho only one in "System: Gateways" and shown as "WAN (default)". No routes are shown in "System: Static Routes". Thanks for your efforts – to all of you! Andreas --------------------------------------------------------------------- To unsubscribe, e-mail: [email protected] For additional commands, e-mail: [email protected] Commercial support available - https://portal.pfsense.org
