> The ADSL is PPPoE with static IP but also offers IPv6 > (local provider MNet). Latter appears to require some > modifications > > http://carsten.schoene.cc/2011/03/natives-ipv6-auf-einem-m-net-dsl-anschluss/ > > (ppp, pppoe, wide-dhcpv6, radvd, etc.). > > 1) Will pfSense be able to handle the simple case > (dual-WAN with load-leveling, one interface DHCP, > another PPPOE)?
For v4, yes. Because of NAT. > 2) Any chances with getting IPv6 with ADSL working, > given above complications? Some ISPs statically route your ipv6 space on your circuit, then it will just work even without the dhcp6 client. You can then manually configure a v6 address on your PPPoE. Provided you know what the prefix will be. The dhcp6 client is started for DHCP interfaces but in your case the 2nd WAN interface needs the dhcp6 client. And running two dhcp6 clients appears to be a problem when I tested during development. The interfaces page needs to really have this split out so that you can toggle the dhcp6 client for quite a number of types. As this is going to be the preferred method of configuring by ISPs. I manually launched a dhcp6 client on a native v6 pppoe I had access too in .nl. I quickly discovered that this caused a recursing reconfiguration which made accessing the box remotely really hard. Load balancing with v6 is tricky and requires NPtv6, of which we have support but the page is missing proper validation. I've stopped working on the v6 code about 2 months ago through intervention. I hope to come back to it "soon". Regards, Seth > > -- > Eugen* Leitl <a href="http://leitl.org";>leitl</a> http://leitl.org > ______________________________________________________________ > ICBM: 48.07100, 11.36820 http://www.ativel.com http://postbiota.org > 8B29F6BE: 099D 78BA 2FD3 B014 B08A 7779 75B0 2443 8B29 F6BE > > --------------------------------------------------------------------- > To unsubscribe, e-mail: [email protected] > For additional commands, e-mail: [email protected] > > Commercial support available - https://portal.pfsense.org > --------------------------------------------------------------------- To unsubscribe, e-mail: [email protected] For additional commands, e-mail: [email protected] Commercial support available - https://portal.pfsense.org
