Am 20.07.2011 08:35, schrieb A Mohan Rao:
i tried help from you tube video help then do configure same.
http://www.youtube.com/watch?v=odjviG-KDq8
On Wed, Jul 20, 2011 at 11:56 AM, George Neill <[email protected]
<mailto:[email protected]>> wrote:
Mohan,
Not an expert here, just sharing my experience. I used the wizard and
had just the one issue.
I suspect you'll need to provide more details on your configuration
before an expert could help.
Later,
George
On 7/20/11, A Mohan Rao <[email protected]
<mailto:[email protected]>> wrote:
> yes but still not working i think it is bug because when i try
nat or port
> forwarding also does not work...
> its only working captive portal acl or dhcp.
>
>
> ????
>
> On Wed, Jul 20, 2011 at 11:06 AM, George Neill
<[email protected] <mailto:[email protected]>> wrote:
>
>> Mohan,
>>
>> I suspect your using windows clients? I believe I ran in to the
same
>> issue. Make sure you 'Run as Administrator' the OpenVPN GUI.
If you
>> don't do this the route table on the client doesn't get updated.
You
>> can see errors in the log to confirm.
>>
>> HTH,
>> George
>>
>>
>> On 7/20/11, A Mohan Rao <[email protected]
<mailto:[email protected]>> wrote:
>> > Dear all pfsense experts,
>> >
>> > i m tried open vpn on pfsense 2.0 its successfully configured
but when
>> > user's r try to connect from client end its connected but not
access our
>> lan
>> > network i have to create a rule for that.
>> > but still its not working i had tried googled.
>> >
>> > kindly give any tips or help.
>> >
>> > Thanks
>> >
>> > Mohan Rao
>> >
>>
>>
---------------------------------------------------------------------
>> To unsubscribe, e-mail: [email protected]
<mailto:[email protected]>
>> For additional commands, e-mail: [email protected]
<mailto:[email protected]>
>>
>> Commercial support available - https://portal.pfsense.org
>>
>>
>
---------------------------------------------------------------------
To unsubscribe, e-mail: [email protected]
<mailto:[email protected]>
For additional commands, e-mail: [email protected]
<mailto:[email protected]>
Commercial support available - https://portal.pfsense.org
hi,
you have to watch the output of ovpn when the error occurs.
I know i had to tune some stuff in the config file i imported to windows
vista/7
i think you have to add
route-method exe
route-delay 2
to your config file.
cheers.
---------------------------------------------------------------------
To unsubscribe, e-mail: [email protected]
For additional commands, e-mail: [email protected]
Commercial support available - https://portal.pfsense.org
