Guys, need to make a single LAN network card, plugged into a switch 3com, IP delivery for different grinding machines that may connect to the network, for example:
Computers on the internal network, get the IP subnet 192.168.0.0/24 Computers visitors entering the network, get the IP subnet 192.168.1.0/24 Is there any way to do this? It would be a MAC address? This works beautifully in another proxy that the client had was a Linux Ubuntu, he had an eth0-1 / eth0-2 / eth0-3, Linux was sending the IP address according to the MAC table, that the same eth0, he could perceive only the virtual interface eth0 (192.168.0.0/24 = 1, 2 - 192.168.1.0/24, 3 - 192.168.2.0/24) The pfSense is virtualized, I tried using two NICs connected to the same vm_network, each virtual NIC with DHCP, put each IP address tied to the mac due, but sometimes the machines come in a network, sometimes on another network, I need a solution urgent for a client. I appreciate everyone's help! Ivanildo Galvão - MCP, MCT, MCSA, VSP Consultor de Tecnologia Tel. (84) 3201 2146 | Cel. (84) 9111 8873 [email protected] | www.itservices.com.br Twitter: @ivanildogalvao -----Mensagem original----- De: Nicolas Roussi [mailto:[email protected]] Enviada em: terça-feira, 30 de agosto de 2011 19:38 Para: [email protected] Assunto: [pfSense Support] Traffic Shaper ? Hi, i am running 1.2.3 and I need some ideas on how to limit and prioritize traffic This is the setup internet <---10Mbps--->MainFirewall (NAT)<---1000Mbps--->pfSense(NAT)<----1000Mbps--->1600 wireless clients | | servers Besides the double NATing, first I would like to make sure that traffic that goes to the Internet only uses 2MBps. Second, I would like to block everything except 80,443,548, 25 and a few other services (I can do that in the firewall settings) Third, from those services, I would like to give priority and full bandwidth to AFP (548) then to web and then the rest. Is this possible? Any help is greatly appreciated. Thanks --------------------------------------------------------------------- To unsubscribe, e-mail: [email protected] For additional commands, e-mail: [email protected] Commercial support available - https://portal.pfsense.org --------------------------------------------------------------------- To unsubscribe, e-mail: [email protected] For additional commands, e-mail: [email protected] Commercial support available - https://portal.pfsense.org
