On Thu, Sep 1, 2011 at 08:12, suresh suresh <suresh.notion...@gmail.com> wrote: > No,.. i dont have wifi card.if i configure the wifi router. that goes to the > differnt network. like am pfsense using 192.18.7.10 in wifi coonected > systemshows ip 192.168.1.1 at that time i cant take print or scan both will > come on 7.1 series. how to solve this problem.
It appears that you want pfSense to be the router with the Linksys as a simple wireless access point. Just connect one of your Linksys LAN ports to the LAN port on your pfSense system and turn off the DHCP and DNS servers on the Linksys. You should also configure the Linksys to have an IP in the same address range (192.168.7.0/24) as the pfSense box so you can connect to it. > and also more question how to block the bit torrent. You've already asked this question here once, and I specifically ignored it because I'm not interested in it - someone else may answer the question. Blocking bittorrent isn't trivial, nor is it useful in my opinion. > am using pfsense 1.2.3. You REALLY should use one of the 2.0 release candidates. Version 1.2.3 is supported, but unless you have a serious reason to stick with it, 2.0 is equally stable and has far better features. --------------------------------------------------------------------- To unsubscribe, e-mail: support-unsubscr...@pfsense.com For additional commands, e-mail: support-h...@pfsense.com Commercial support available - https://portal.pfsense.org
