On 2001-07-09 [EMAIL PROTECTED] <Ian> said:
>Ive got my feelings about Microsoft but please, do I have to
>collect endless discussion about them here ?
Of course not. Have you tried the instructions in the last quoted
paragraph at the end of this note in your attempts to unsubscribe?
I don't blame you for being tired about *Microsoft-crap* discussions.
One way to diminish them is to start a thread on something closer to
what you feel the list should discuss. Is there anything else *you*
would like to talk about?
>Also my understanding is this list is for the users of older
>computers so I dont see why people are posting articles
>about the latest software that clearly wont run on old machines.
>Certainly, I use old machines exclusively and thats why I
>subscribed.
That's my understanding, too, and I like to use older machines almost
exclusively. At present I'm using an IBM PS/ValuePoint 433DX/Si,
as mentioned in my trailing signature, but I'm also surrounded by
several other machines, and depending on my need/interest/mood of
the moment, I switch between them -- most of which share a single
phone connection to my ISP. My other SurvPCs are an IBM PC/AT 5170
Model 339 (8 MHz, 512k RAM); IBM PS/2 Model 30/286 (10 MHz, 1024k RAM);
486 DX2 IBM clone (50 MHz, 8MB RAM) -- and two laptops: a Sharp PC 4502
(7.11 MHz, 640k RAM, no modem or HDD, just two 720k FDDs), and a TRS-80
Model 100 (Tandy/Radio Shack, 2.4MHz, no FDD or HDD, a 300 bps modem
and connected with a null modem to my PC/AT for data transfer). And
other bits and pieces of a few other old machines. I had an IBM XT,
but it unfortunately continued to have more trouble than I could figure
out, and I gave it away to another lover of old computers. I'm now
concentrating primarily on AT-class machines.
I'm quite interested in exploring some of the old DOS programs, too.
I use several versions of PC DOS on most of the old machines above,
and I have a special fondness for WordStar (I have versions 3.30p,
4.0p, 5.0 and 7.0a)
>To unsubscribe from SURVPC send a message to [EMAIL PROTECTED]
>with unsubscribe SURVPC in the body of the message.
I'm sure a lot of us here on the list have similar collections. Let us
know what you're doing, or follow the instructions above to unsubscribe;
if it doesn't work, we'll be more than happy to help you leave. ;-)
Jerry -- using his IBM PS/ValuePoint 433DX/Si | 16MB RAM; 504MB HDD
and his internal 56 kbps V.90 ITU Award Technology modem
Net-Tamer V 1.11.2 - Registered
To unsubscribe from SURVPC send a message to [EMAIL PROTECTED] with
unsubscribe SURVPC in the body of the message.
Also, trim this footer from any quoted replies.
More info can be found at;
http://www.softcon.com/archives/SURVPC.html