James, My first instinct says "check the cable." Make sure it's not upside down, make sure it's centered on the connector. Make sure it's not loose at either drive.
Check power to the floppies. Make sure the connector is on and seated at both drives. My next check would be jumpers on the floppy unit that set it for something other than 1st drive. Which drive is supposed to be A: in this system? ~~Garry [EMAIL PROTECTED] ----- Original Message ----- Date sent: Mon, 19 Nov 2001 21:00:14 -0600 From: James W Fuller <[EMAIL PROTECTED]> > I replaced the 3.5 inch floppy drive in my 386 with > one I took out of another computer. Now the computer > will not read either the 3.5 inch drive or the 5.25 > inch drive. I have power on both of them. Do you > have any suggestions about why it can't read either > one? > > Thanks > Jim Fuller > To unsubscribe from SURVPC send a message to [EMAIL PROTECTED] with unsubscribe SURVPC in the body of the message. Also, trim this footer from any quoted replies. More info can be found at; http://www.softcon.com/archives/SURVPC.html
