Hello, Found this list most interesting and It has inspired me to root through my collection of old 386 & 486 motherboards etc.
I dug out an old baby-AT 386sx25 and fitted a 387sx25 co-pro recovered from another junked system. I could configure it in the bios but POST and any software say it isnt present. I then put the 387 onto another board with 33Mhz clock speed...The handbook tels me I need to clock it from an external clock and set the jumper to "asyncronous", however it all seems to work OK setting it to syncronous, clocking it from the CPU. Will the co-pro work reliably in this configuration? Is there any software available to test it thogroughly? Why didnt it work on the SX25 board? I suspect Ive probably got a faulty board but it works OK in all other respects... TIA Nick __________________________________________________ Do You Yahoo!? Everything you'll ever need on one web page from News and Sport to Email and Music Charts http://uk.my.yahoo.com To unsubscribe from SURVPC send a message to [EMAIL PROTECTED] with unsubscribe SURVPC in the body of the message. Also, trim this footer from any quoted replies. More info can be found at; http://www.softcon.com/archives/SURVPC.html
