Hello John hello All,
I sent the message and the problem is that the sound card would only
work in Nettamer and not any other way? The driver in Nettamer is Plany. I
cannot get Plany to drive the card outside of Nettamer.
I will include here the lines that are in my autoexec.bat file:
C:\EIGSOUND\SOUNDEN.EXE /s1 /f=C:\EIGSOUND\SOUND.INI
C:\EIGSOUND\ESSCFG.EXE /A:220 /I:5 /D:1 /B:300 /M:E
C:\EIGSOUND\ESSVOL.EXE /V:8 /L:8 /W:8 /M:0 /C:8 /S:8 /A:8
I already have the two files that you mentioned for controlling the card
in dos but they don't seem to be helping or in other words I cannot get the
card to respond but in Nettamer?
Here is the sound.ini file again: The autoexec.bat file does point to
it as you can tell.
[auddrive.drv]
mpu401=NO
AudioDrive=ES1688
Synth=OPL3
portchoices=220,240
irqchoices=2,5,7,10
dmachoices=0,1,3
port=220
int=5
mem=D0000
dmachannel=1
AutoConfig=NO
VerifyInt=NO
VerifyDMA=NO
Mute=No
MutePCspk=No
VolumeMutes=4
VolumeMixer=59
WaveInMixer=2
VoiceMixer=2
WaveInMonitor=No
VoiceMonitor=No
VolumeMaster=65535
VolumeMasterR=65535
VolumeWave=32768
VolumeWaveR=32768
VolumeSynth=51400
VolumeSynthR=51400
VolumeLine=32768
VolumeLineR=32768
VolumeMic=32768
VolumeMicR=32768
VolumeCD=32768
VolumeCDR=32768
VolumeAuxB=32768
VolumeAuxBR=32768
VolumePCspk=32768
WaveInMic=32768
WaveInMicR=32768
WaveInLine=32768
WaveInLineR=32768
WaveInCD=32768
WaveInCDR=32768
WaveInSynth=32768
WaveInSynthR=32768
WaveInAuxB=32768
WaveInAuxBR=32768
WaveInMaster=32768
WaveInMasterR=32768
VoiceMic=32768
VoiceMicR=32768
VoiceLine=32768
VoiceLineR=32768
VoiceCD=32768
VoiceCDR=32768
VoiceAuxB=32768
VoiceAuxBR=32768
VoiceMaster=32768
VoiceMasterR=32768
To unsubscribe from SURVPC send a message to [EMAIL PROTECTED] with
unsubscribe SURVPC in the body of the message.
Also, trim this footer from any quoted replies.
More info can be found at;
http://www.softcon.com/archives/SURVPC.html
