Hallo,
da du ja schon einiges versucht hast nun noch zwei Dinge die vielleicht
weiterhelfen k�nnten.
Punkt Nummer 1 : Mach ein Update von deinem alten Motherboard Bios. (PNP
enabled ? und bitte kein IRQ f�r PNP-Karten reservieren)
Nummer 2 : Mach einen neuen Kernel, du brauchst kein ISDN-Support
f�r den Kernel aber ISAPNP-faehig sollte er schon sein.
alles andere wird modular mit YAST (suse)
geladen.
Martin Zwick
for a better _standing
> -----Urspr�ngliche Nachricht-----
> Von: [EMAIL PROTECTED] [SMTP:[EMAIL PROTECTED]]
> Gesendet am: Mittwoch, 17. M�rz 1999 08:48
> An: [EMAIL PROTECTED]
> Betreff: [S.u.S.E. ISDN] Teles 16.3c PnP - Problem
>
> Hallo
>
> ich mache gerade meine ersten Gehversuche mit ISDN.
>
> Leider scheitert schon die Initialisierung beim booten. Ich habe schon
> verschiedene Interrupts probiert aber leider immer mit dem gleichen Er-
> gebnis.
>
> Ich verwende eine "Teles 16.3c PnP".
>
> Leider weiss ich jetzt nicht mehr weiter.
>
> Den Inhalt einiger Files habe ich im folgenden mal aufgelistet.
>
>
> /var/log/messages
> -----------------
> Mar 17 06:46:15 athen kernel: klogd 1.3-3, log source = /proc/kmsg
> started.
> Mar 17 06:46:15 athen kernel: Inspecting /boot/System.map
> Mar 17 06:46:16 athen kernel: Loaded 5199 symbols from /boot/System.map.
> Mar 17 06:46:16 athen kernel: Symbols match kernel version 2.0.36.
> Mar 17 06:46:16 athen kernel: Loaded 5 symbols from 2 modules.
> Mar 17 06:46:16 athen kernel: sysctl: ip forwarding off
> Mar 17 06:46:16 athen kernel: ISDN subsystem Rev:
> 1.44.2.9/1.41.2.11/1.48.2.27/1.28.2.2/1.8.2.2 loaded
> Mar 17 06:46:16 athen kernel: HiSax: Linux Driver for passive ISDN cards
> Mar 17 06:46:16 athen kernel: HiSax: Version 3.1 (module)
> Mar 17 06:46:16 athen kernel: HiSax: Layer1 Revision 1.15.2.19
> Mar 17 06:46:16 athen kernel: HiSax: Layer2 Revision 1.10.2.11
> Mar 17 06:46:16 athen kernel: HiSax: TeiMgr Revision 1.8.2.7
> Mar 17 06:46:16 athen kernel: HiSax: Layer3 Revision 1.10.2.6
> Mar 17 06:46:16 athen kernel: HiSax: LinkLayer Revision 1.30.2.13
> Mar 17 06:46:16 athen kernel: HiSax: Approval certification valid
> Mar 17 06:46:16 athen kernel: HiSax: Approved with ELSA Quickstep series
> cards
> Mar 17 06:46:16 athen kernel: HiSax: Approval registration numbers:
> Mar 17 06:46:16 athen kernel: HiSax: German D133361J CETECOM ICT Services
> GmbH
> Mar 17 06:46:16 athen kernel: HiSax: EU (D133362J) CETECOM ICT Services
> GmbH
> Mar 17 06:46:16 athen kernel: HiSax: Total 1 card defined
> Mar 17 06:46:16 athen kernel: HiSax: Card 1 Protocol EDSS1 Id=HiSax (0)
> Mar 17 06:46:16 athen kernel: HiSax: Teles 16.3c driver Rev. 1.1.2.3
> Mar 17 06:46:16 athen kernel: teles3c: defined at 0x100 IRQ 12 HZ 100
> Mar 17 06:46:16 athen kernel: teles3c: resetting card
> Mar 17 06:46:16 athen kernel: Teles 16.3c: IRQ 12 count 0
> Mar 17 06:46:16 athen kernel: Teles 16.3c: IRQ 12 count 0
> Mar 17 06:46:16 athen kernel: Teles 16.3c: IRQ(12) getting no interrupts
> during init 1
> Mar 17 06:46:16 athen kernel: teles3c: resetting card
> Mar 17 06:46:16 athen kernel: Teles 16.3c: IRQ 12 count 0
> Mar 17 06:46:16 athen kernel: Teles 16.3c: IRQ(12) getting no interrupts
> during init 2
> Mar 17 06:46:16 athen kernel: teles3c: resetting card
> Mar 17 06:46:16 athen kernel: Teles 16.3c: IRQ 12 count 0
> Mar 17 06:46:16 athen kernel: Teles 16.3c: IRQ(12) getting no interrupts
> during init 3
> Mar 17 06:46:16 athen kernel: HiSax: Card Teles 16.3c not installed !
> Mar 17 06:46:16 athen kernel: ISDN-subsystem unloaded
> Mar 17 06:46:16 athen kernel: ISDN subsystem Rev:
> 1.44.2.9/1.41.2.11/1.48.2.27/1.28.2.2/1.8.2.2 loaded
> Mar 17 06:46:16 athen kernel: HiSax: Linux Driver for passive ISDN cards
> Mar 17 06:46:16 athen kernel: HiSax: Version 3.1 (module)
> Mar 17 06:46:16 athen kernel: HiSax: Layer1 Revision 1.15.2.19
> Mar 17 06:46:16 athen kernel: HiSax: Layer2 Revision 1.10.2.11
> Mar 17 06:46:16 athen kernel: HiSax: TeiMgr Revision 1.8.2.7
> Mar 17 06:46:16 athen kernel: HiSax: Layer3 Revision 1.10.2.6
> Mar 17 06:46:16 athen kernel: HiSax: LinkLayer Revision 1.30.2.13
> Mar 17 06:46:16 athen kernel: HiSax: Approval certification valid
> Mar 17 06:46:16 athen kernel: HiSax: Approved with ELSA Quickstep series
> cards
> Mar 17 06:46:16 athen kernel: HiSax: Approval registration numbers:
> Mar 17 06:46:16 athen kernel: HiSax: German D133361J CETECOM ICT Services
> GmbH
> Mar 17 06:46:16 athen kernel: HiSax: EU (D133362J) CETECOM ICT Services
> GmbH
> Mar 17 06:46:16 athen kernel: HiSax: Warning - no protocol specified
> Mar 17 06:46:16 athen kernel: HiSax: Note! module load syntax has changed.
> Mar 17 06:46:16 athen kernel: HiSax: using protocol EURO
> Mar 17 06:46:16 athen kernel: HiSax: Total 0 card defined
> Mar 17 06:46:16 athen kernel: ISDN-subsystem unloaded
> Mar 17 06:46:24 athen papd[147]: restart (1.4b2+asun2.0a18.2)
> Mar 17 06:46:25 athen afpd[149]: main: atp_open: Invalid argument
> Mar 17 06:46:25 athen afpd[149]: ASIP started on 192.168.0.99:548(1)
> (1.4b2+asun2.0a18.2)
> Mar 17 06:46:28 athen lpd[176]: restarted
> Mar 17 06:46:32 athen /usr/sbin/cron[199]: (CRON) STARTUP (fork ok)
> Mar 17 06:46:32 athen squid[194]: Starting Squid Cache version 1.NOVM.21
> for i686-pc-linux-gnu...
> Mar 17 06:46:33 athen su: (to postgres) root on /dev/console
> Mar 17 06:46:34 athen squid[194]: Ready to serve requests.
> ======================================================================
>
> /var/log/warn
> -------------
> Mar 17 06:46:16 athen kernel: Teles 16.3c: IRQ(12) getting no interrupts
> during init 1
> Mar 17 06:46:16 athen kernel: Teles 16.3c: IRQ(12) getting no interrupts
> during init 2
> Mar 17 06:46:16 athen kernel: Teles 16.3c: IRQ(12) getting no interrupts
> during init 3
> Mar 17 06:46:16 athen kernel: HiSax: Card Teles 16.3c not installed !
> Mar 17 06:46:16 athen kernel: HiSax: Warning - no protocol specified
> Mar 17 06:46:16 athen kernel: HiSax: Note! module load syntax has changed.
> Mar 17 06:46:16 athen kernel: HiSax: using protocol EURO
> Mar 17 06:46:25 athen afpd[149]: main: atp_open: Invalid argument
> Mar 17 06:46:32 athen squid[194]: Starting Squid Cache version 1.NOVM.21
> for i686-pc-linux-gnu...
> Mar 17 06:46:34 athen squid[194]: Ready to serve requests.
>
> ======================================================================
> /etc/isapnp
> -----------
> # $Id: pnpdump.c,v 1.17 1998/11/10 22:45:04 fox Exp $
> # This is free software, see the sources for details.
> # This software has NO WARRANTY, use at your OWN RISK
> #
> # For details of this file format, see isapnp.conf(5)
> #
> # For latest information on isapnp and pnpdump see:
> # http://www.roestock.demon.co.uk/isapnptools/
> #
> # Compiler flags: -DREALTIME -DNEEDSETSCHEDULER -DABORT_ONRESERR
> #
> # Trying port address 0203
> # Board 1 has serial identifier 46 1b c8 07 bf 20 26 27 50
>
> # (DEBUG)
> (READPORT 0x0203)
> (ISOLATE PRESERVE)
> (IDENTIFY *)
> (VERBOSITY 2)
> (CONFLICT (IO FATAL)(IRQ FATAL)(DMA FATAL)(MEM FATAL)) # or WARNING
>
> # Card 1: (serial identifier 46 1b c8 07 bf 20 26 27 50)
> # Vendor Id TAG2620, Serial Number 466094015, checksum 0x46.
> # Version 1.0, Vendor version 2.1
> # ANSI string -->TELES.S0/16.3c Plug&Play<--
> #
> # Logical device id TAG2620
> # Device support I/O range check register
> # Device supports vendor reserved register @ 0x38
> # Device supports vendor reserved register @ 0x3d
> #
> # Edit the entries below to uncomment out the configuration required.
> # Note that only the first value of any range is given, this may be
> changed if required
> # Don't forget to uncomment the activate (ACT Y) when happy
>
> (CONFIGURE TAG2620/466094015 (LD 0
> # Logical device decodes 16 bit IO address lines
> # Minimum IO base address 0x0100
> # Maximum IO base address 0x0ffe
> # IO base alignment 2 bytes
> # Number of IO addresses required: 2
> (IO 0 (SIZE 2) (BASE 0x0100))
> # IRQ 3, 5, 9, 10, 11, 12 or 15.
> # High true, edge sensitive interrupt (by default)
> (INT 0 (IRQ 12 (MODE +E)))
> # Vendor defined tag: 84 a1 32 36 32 30 39 30 31 38 33 30 37 31 31 32
> # Vendor defined tag: 84 a2 54 45 4c 45 53
> (NAME "TAG2620/466094015[0]{TELES.S0/16.3c Plug&Play}")
> (ACT Y)
> ))
> # End tag... Checksum 0x00 (OK)
>
> # Returns all cards to the "Wait for Key" state
> (WAITFORKEY)
>
> ======================================================================
> isapnp /etc/isapnp.conf
> -----------------------
> lspci not found, so PCI resource conflict not checked
> Board 1 has Identity 27 10 0a 8d e9 2b 00 8c 0e: CTL002b Serial No
> 269127145 [checksum 27]
> Board 2 has Identity 46 1b c8 07 bf 20 26 27 50: TAG2620 Serial No
> 466094015 [checksum 46]
> TAG2620/466094015[0]{TELES.S0/16.3c Plug&Play}: Port 0x100; IRQ12 ---
> Enabled OK
>
> ======================================================================
> /etc/rc.config.d/i4l_hisax.rc.config
> ------------------------------------
> #
> # driver-id for HiSax-driver
> # set to "HiSax"
> # or whatever you defined when loading driver within kernel
> # set to "" if you don't have a hisax-card
> #
> I4L_ID="HiSax"
> # Type ISDN-card Required parameters
> # ---- ---------------------
> -------------------------------------------
> # 1 Teles 16.0 irq, mem, io
> # 2 Teles 8.0 irq, mem
> # 3 Teles 16.3 (non PnP) irq, io
> # 4 Creatix/Teles PnP irq, io0 (ISAC), io1 (HSCX)
> # 5 AVM A1 (Fritz) irq, io
> # 6 ELSA PCC/PCF cards io or nothing for autodetect (the iobase
> is
> # only required, if you have more than one
> ELSA
> # card in your PC)
> # 7 ELSA Quickstep 1000 irq, io (from isapnp setup)
> # 8 Teles 16.3 PCMCIA irq, io
> # 9 ITK ix1-micro Rev.2 irq, io
> # since: HiSax 2.5:
> # 10 ELSA PCMCIA irq, io (set with card manager)
> # 11 Eicon.Diehl Diva ISA PnP irq, io
> # 11 Eicon.Diehl Diva PCI no parameter
> # 12 ASUS COM ISDNLink irq, io (from isapnp setup)
> # 13 HFC-2BS0 based cards irq, io
> # 14 Teles 16.3c irg, io
> # 15 Sedlbauer Speed Card irq, io
> # (= Teledat 100)
> # 16 USR Sportster internal irq, io
> # 17 MIC card irq, io
> # 18 ELSA Quickstep 1000PCI no parameter
> # 19 Compaq ISDN S0 ISA card irq, io0, io1, io (from isapnp setup
> io=IO2)
> # 20 NETjet PCI card no parameter
> # 21 Teles PCI no parameter
> # 22 Sedlbauer Speed Star (PCMCIA) irq, io (set with card manager)
> # 24 Dr. Neuhaus Niccy PnP irq, io0, io1 (from isapnp setup)
> # 24 Dr. Neuhaus Niccy PCI no parameter
> # 25 Teles S0Box irq, io (of the used lpt port)
> #
> I4L_TYPE="14"
> #
> # IRQ of Teles Card
> # eg. 12 or 15 when loading as module
> # set to "" when driver is loaded within kernel
> #
> I4L_IRQ="12"
> #
> # Membase of Teles card (e.g. "0xd2000" for Teles S0/16, "0" for Teles
> S0/16.3)
> #
> I4L_MEMBASE="0"
> #
> # Portaddress of Teles card (e.g. 0xd80, "0" for S0/8)
> #
> I4L_PORT="0x0100"
> #
> # for Creatix PNP: IO0 (ISAC)
> #
> # I4L_IO0=""
> #
> # for Creatix PNP: IO1 (HSCX)
> #
> # I4L_IO1=""
> #
> # for HiSax-modul: the complete line to load module
> # e.g Fritzcard, Euro ISDN, I/O base 340 hex, IRQ 10 and ELSA PCF, Euro
> ISDN:
> # "type=5,6 protocol=2,2 io=0x340 irq=10 id=Fritz%Elsa"
> #
> I4L_MODUL_OPTIONS=""
> ======================================================================
>
>
>
> ---------------------------------------------------------------------
>
> ** Marcus Thiedecke E-mail: [EMAIL PROTECTED]
>
>
>
> -
> To unsubscribe from this list please send a mail to [EMAIL PROTECTED]
> with
> 'unsubscribe suse-isdn' in its body.
-
To unsubscribe from this list please send a mail to [EMAIL PROTECTED] with
'unsubscribe suse-isdn' in its body.
