On 22-Jan-99 dizzy wrote:
>
> Ok
> I send a mesage this am that apparently diddnt make it to the list
>
> the question is
> can someone post their *working* /etc/diald.config &
> /etc/suseppp/diald/generic.diald
>
> *current error status*
>
> 1) diald wont start from boot. It says yes in rc.config and the system
> boots up on run level 2
> I have to start diald manually ie:diald
Never! USe the /sbin/init.d/rcx.d/S20diald scirpt (or the relative to link)
> 2) when I request a service such as telnet <my provider in /etc/hosts>
> it triggers diald and sucessfully dials up gives me a local IP and
> remote IP then states
> "ppp not replacing existing default route to $"
> "connect script timed out. KIlling script"
Im not so sure but... have you checked for permission missunderstood ?
> notice the error is *after* the ip address are issued !
> Ive tried tweeking both /etc/diald.conf and
> /etc/suseppp/diald/generic.diald
> while diald was dialing up every 30 seconds
> no change
This kind of problem don't seem to affect diald but the routing table which is
statically write to /etc/route.conf, you should check for some enviroment
variables cause the latest "$" seem to point anywhere, and of course...
permissions :)
----------------------------------
Date: 23-Jan-99
Time: 15:21:44
"In order to make an apple pie from scratch, you must first create the
universe."
-- Carl Sagan, Cosmos
----------------------------------
-
To get out of this list, please send email to [EMAIL PROTECTED] with
this text in its body: unsubscribe suse-linux-e
Check out the SuSE-FAQ at http://www.suse.com/Support/Doku/FAQ/ and the
archiv at http://www.suse.com/Mailinglists/suse-linux-e/index.html
