Maurizio Firmani wrote:
>
---snip---
> ascii|lp1|ljet4-a4-ascii-mono-300|ljet4 a4 ascii mono 300:\
>
> this means that I can print an ascii file with a resolution of 00 dpi with the
> a2ps filter with the command lpr -P PrinterName FileToBePrinted
> where PrinterName is one among ascii, lp1,ljet4...
>
> The corresponding line for a 600x600 dpi resolution is
>
> ljet4-ascii|lp4|ljet4-a4-ascii-mono-600|ljet4 a4 ascii mono 600:\
>
> The shortest way to refer to a printing mode is lpN (where N is a number), but
> it is quite hard to remember that lp5 correspond to a Postscript printing mode
> with 600x600 dpi.
>
>
---snip---
you might try replacing the text following the ...|lp#| from
ljet4-a4.... to lj300 and lj600 and see if that works. Just make sure
that you back up the printcap file so you don't have rerun yast if it
doesn't work.
--
__ _
Mark Wagnon -o) / / (_)__ __ ____ __
Chula Vista, CA /\\/ /__/ / _ \/ // /\ \/ /
mailto:[EMAIL PROTECTED] _\_v____/_/_//_/\_,_/ /_/\_\
-
To get out of this list, please send email to [EMAIL PROTECTED] with
this text in its body: unsubscribe suse-linux-e
Check out the SuSE-FAQ at http://www.suse.com/Support/Doku/FAQ/ and the
archiv at http://www.suse.com/Mailinglists/suse-linux-e/index.html
