Dear Joe,
Have you also enabled ipforwarding in the rc.config file. This can also be
done via yast and configuration file. I have had the same problem. if you
want to use kernel 2.2.x new problems will occur that is ipchains. That can
be downloaded from www.suse.de/~bb/
If you need more help you can ask. I have setup IP masquerading using Suse
6.0 with 2.0.x and now with 2.2.x
Regards,
Joop Boonen.
joe lerch wrote:
> IP masquerading seemed much easier with 5.3. With 6.0, we just
> can't get it working properly, went through the howto's did everything
> we read about and still no good. The ip masquerading module loads at boot
> time, but nothing gets through.
>
> Would someone with a lot of experience please take the time
> to write out the steps to follow to get ip-masqurding working
> with SuSe 6.0? At this point, we have changed so many things
> in an effort to get it working that we may have set something
> wrong. We use wvdial for our dialer, which worked well with
> SuSE 5.3 and ip masqurading, but not sure if that could be
> a problem with 6.0.
>
> Any information that you care to offer will be sincerely appreciated,
> maybe someone could eventually write up some kind of script
> to step people through the process, make it as easy to use as
> In-joy for OS/2 :)
>
> thanks in advance,
>
> joe
>
> --
> To get out of this list, please send email to [EMAIL PROTECTED] with
> this text in its body: unsubscribe suse-linux-e
> Check out the SuSE-FAQ at http://www.suse.com/Support/Doku/FAQ/ and the
> archive at http://www.suse.com/Mailinglists/suse-linux-e/index.html
--
To get out of this list, please send email to [EMAIL PROTECTED] with
this text in its body: unsubscribe suse-linux-e
Check out the SuSE-FAQ at http://www.suse.com/Support/Doku/FAQ/ and the
archive at http://www.suse.com/Mailinglists/suse-linux-e/index.html
