Samy Elashmawy wrote:
>
> Linksys at www.linksys.com
>
> They have both ethernet and fast ethernet , as well as swithches and hubs.
> Got a network kit with a 4 port hub , two fast ethernet cards from staples
> for 99.00
>
> There teck support is good. they return your call when bussey , I called
> twice got callbacks 1 hr and 3 hrs latter.
>
> there cards come with disk with dos drivers , and you can use it to
> setup/configure the card as well as to turn of plug and ply. They fully
> support linux as well , use the dec tulip driver , for the fast ether , or
> the ne200 for the ne200 comp. card.
>
> the fast ether preforms realy nice , what a diffrece from thin ethernet. I
> couldent tell I was on the lan.
> happy hunting
do you have to do anything special to get 100MB?
On the one hand I have this from ifconfig:
eth0 Link encap:10Mbps Ethernet HWaddr
00:A0:CC:22:30:2C
inet addr:192.168.1.3 Bcast:192.168.1.255
Mask:255.255.255.0
UP BROADCAST RUNNING MULTICAST MTU:1500 Metric:1
RX packets:2325669 errors:8 dropped:0 overruns:8
TX packets:2951384 errors:0 dropped:0 overruns:0
Interrupt:9 Base address:0x6600
On the other hand, the 100BT light is on my Linksyses.
--
yours,
Andy
-
To get out of this list, please send email to [EMAIL PROTECTED] with
this text in its body: unsubscribe suse-linux-e
Check out the SuSE-FAQ at http://www.suse.com/Support/Doku/FAQ/ and the
archiv at http://www.suse.com/Mailinglists/suse-linux-e/index.html
