Hallo
Du hast nicht etwa SuSE 6.0 mit 'nem neuen Kernel? Die Probleme hatte ich
auch, hab sie auch nicht geloest bekommen. Nun mit SuSE 6.1 funktionierts
wieder.
Hagen
=======================================================
[EMAIL PROTECTED]
http://www.cs.uni-magdeburg.de/~hoepfner
=======================================================
Linux, WinNT and MS-DOS. The Good, The Bad and The Ugly
On Tue, 27 Apr 1999, roland.manser wrote:
>
> hallo Liste
> komm nicht zurecht mit cdrecord, habe folgende Meldungen
> RTFM hab ich schon durch...
> (error ganz unten)
>
> Danke
> Roland Manser
>
> bash-2.02# cdrecord -dummy -v speed=2 fs=4m dev=4,0
> /home/cdimage/image1.raw
> Cdrecord release 1.6.1 Copyright (C) 1995-1998 Jörg Schilling
> TOC Type: 1 = CD-ROM
> scsidev: '4,0'
> scsibus: 0 target: 4 lun: 0
> atapi: -1
> Device type : Removable CD-ROM
> Version : 2
> Response Format: 2
> Capabilities : SYNC
> Vendor_info : 'PHILIPS '
> Identifikation : 'CDD3600 CD-R/RW '
> Revision : '2.00'
> Device seems to be: Generic mmc CD-RW.
> Using generic SCSI-3/mmc CD-R driver (mmc_cdr).
> Driver flags : SWABAUDIO
> Track 01: data 38 MB
> Total size: 44 MB (04:22.04) = 19653 sectors
> Lout start: 44 MB (04:24/03) = 19653 sectors
> cdrecord: Input/output error. test_unit_ready: scsi sendcmd: retryable
> error
> CDB: 00 00 00 00 00 00
> status: 0x2 (CHECK CONDITION)
> Sense Bytes: F0 00 02 00 00 00 00 28 00 00 17 2B 3A 00 00 00
> Sense Key: 0x2 Not Ready, Segment 0
> Sense Code: 0x3A Qual 0x00 (medium not present) Fru 0x0
> Sense flags: Blk 0 (valid)
> cdrecord: No disk / Wrong disk!
> bash-2.02# cdrecord -dummy -v speed=2 fs=4m dev=4,0
> /home/cdimage/image1.raw
> Cdrecord release 1.6.1 Copyright (C) 1995-1998 Jörg Schilling
> TOC Type: 1 = CD-ROM
> scsidev: '4,0'
> scsibus: 0 target: 4 lun: 0
> atapi: -1
> Device type : Removable CD-ROM
> Version : 2
> Response Format: 2
> Capabilities : SYNC
> Vendor_info : 'PHILIPS '
> Identifikation : 'CDD3600 CD-R/RW '
> Revision : '2.00'
> Device seems to be: Generic mmc CD-RW.
> Using generic SCSI-3/mmc CD-R driver (mmc_cdr).
> Driver flags : SWABAUDIO
> Track 01: data 38 MB
> Total size: 44 MB (04:22.04) = 19653 sectors
> Lout start: 44 MB (04:24/03) = 19653 sectors
> Current Secsize: 2048
> ATIP start of lead in: -11325 (97:31/00)
> ATIP start of lead out: 336225 (74:45/00)
> Disk type: Cyanine, AZO or similar
> Manufacturer: Ritek Co.
> Blocks total: 336225 Blocks current: 336225 Blocks remaining: 316572
> RBlocks total: 345460 RBlocks current: 345460 RBlocks remaining: 325807
> Starting to write CD/DVD at speed 2 in dummy mode for single session.
> Last chance to quit, starting dummy write in 1 seconds.
> Waiting for reader process to fill input-buffer ... input-buffer ready.
> Starting new track at sector: 0
> cdrecord: Cannot allocate memory. Cannot send SCSI cmd via ioctl
> --
> Um aus der Liste ausgetragen zu werden, eine Mail an [EMAIL PROTECTED]
> schicken, mit dem Text: unsubscribe suse-linux
--
Um aus der Liste ausgetragen zu werden, eine Mail an [EMAIL PROTECTED]
schicken, mit dem Text: unsubscribe suse-linux
