I'm not sure...,

you are using an ASCII-Terminal via the serial port, aren't you??

please have a look at the OBP-Parameters 'input-device' and
'output-device'.

at the ok-prompt type 'printenv' then you get the list.

may be they are set to 'keyboard' and 'screen', so the system expects
input from keyboard and not from serial port...

try to set them both on ttya with 

ok> setenv output-device ttya 
ok> setenv input-device ttya

I hope this is helpful.

regards, peter.
-- 

> Paquay Eric wrote:
> 
> Hi !
> 
> I'm running an headless SPARCstation 10 with 64 MB DRAM.
> I've connected a CD ROM player to the station, but when i'm trying to
> start
> the installation of the SuSe 7.3, i'm receiving this error message on
> my
> terminal connection.
> 
> "PROMLIB: obio_ranges 5
> Inconsistent or unknown console"
> 
> I'm new with Sun material, could you help me ?
> 
> Regards,
> 
> Eric Paquay
> [EMAIL PROTECTED]
> 
> Complete printscreen is here
> 
> ----------------------------------------------------------------------------
> ----
> 
> ok boot cdrom
> Resetting ...
> ttya initialized
> Cpu #0 TI,TMS390Z55
> Cpu #1 Nothing there
> Cpu #2 Nothing there
> Cpu #3 Nothing there
> Probing Memory Bank #0 16 Megabytes of DRAM
> Probing Memory Bank #1 Nothing there
> Probing Memory Bank #2 Nothing there
> Probing Memory Bank #3 16 Megabytes of DRAM
> Probing Memory Bank #4 Nothing there
> Probing Memory Bank #5 Nothing there
> Probing Memory Bank #6 16 Megabytes of DRAM
> Probing Memory Bank #7 16 Megabytes of DRAM
> Probing /iommu@f,e0000000/sbus@f,e0001000 at f,0  espdma esp sd st
> ledma le
> SUNW,bpp SUNW,
> DBRIe mmcodec
> Probing /iommu@f,e0000000/sbus@f,e0001000 at 0,0  Nothing there
> Probing /iommu@f,e0000000/sbus@f,e0001000 at 1,0  Nothing there
> Probing /iommu@f,e0000000/sbus@f,e0001000 at 2,0  Nothing there
> Probing /iommu@f,e0000000/sbus@f,e0001000 at 3,0  Nothing there
> screen not found.
> Cpu #0 TI,TMS390Z55
> Cpu #1 Nothing there
> Cpu #2 Nothing there
> Cpu #3 Nothing there
> Probing Memory Bank #0 16 Megabytes of DRAM
> Probing Memory Bank #1 Nothing there
> Probing Memory Bank #2 Nothing there
> Probing Memory Bank #3 16 Megabytes of DRAM
> Probing Memory Bank #4 Nothing there
> Probing Memory Bank #5 Nothing there
> Probing Memory Bank #6 16 Megabytes of DRAM
> Probing Memory Bank #7 16 Megabytes of DRAM
> Probing /iommu@f,e0000000/sbus@f,e0001000 at f,0  espdma esp sd st
> ledma le
> SUNW,bpp SUNW,
> DBRIe mmcodec
> Probing /iommu@f,e0000000/sbus@f,e0001000 at 0,0  Nothing there
> Probing /iommu@f,e0000000/sbus@f,e0001000 at 1,0  Nothing there
> Probing /iommu@f,e0000000/sbus@f,e0001000 at 2,0  Nothing there
> Probing /iommu@f,e0000000/sbus@f,e0001000 at 3,0  Nothing there
> 
> SPARCstation 10  (1 X 390Z55), Keyboard Present
> ROM Rev. 2.12, 64 MB memory installed, Serial #3260878.
> Ethernet address 8:0:20:1d:53:cf, Host ID: 7231c1ce.
> 
> Rebooting with command: cdrom
> Boot device: /iommu/sbus/espdma@f,400000/esp@f,800000/sd@6,0:d   File
> and
> args:
> SILO
> 
>                       >>>>> SuSE Linux/SPARC 7.3 <<<<<
> 
> =========================================================================
> 
>   You can type one of the following options here and press enter or
> wait
>   for the timeout to start the installation with YaST2:
> 
>   yast2  - default, start the installation with YaST2.
> 
>   text   - start YaST2 in text mode
> 
>   manual - if you wish to load modules or make other changes before
>            starting YaST2
> 
>   rescue - to start the rescue system. This does not work yet with a
>            serial console
> 
> boot: text
> Uncompressing image...
> Loading initial ramdisk....
> PROMLIB: obio_ranges 5
> Inconsistent or unknown console
> Program terminated
> Type  help  for more information
> ok
> 
> ----------------------------------------------------------------------------
> ----

-- 
-------------------------------------------- 
CLASS AG - http://www.class.de
                                        
Peter Dietrich
Support Engineer                      
Support Competence Center
Tel   +49 (0) 8151/991-247
mailto:[EMAIL PROTECTED]

------------------------------------------------------------------

Sie können nun auch online Cases eröffnen und verwalten, Software
downloaden, Serviceverträge einsehen und vieles, vieles mehr.
 
Besuchen Sie uns unter:  http://www.sun.com/service/online/

------------------------------------------------------------------
begin:vcard 
n:Dietrich;Peter
x-mozilla-html:FALSE
org:Class Firmengruppe
adr:;;;;;;
version:2.1
email;internet:[EMAIL PROTECTED]
title:Supportengineer
x-mozilla-cpt:;0
fn:Peter Dietrich
end:vcard

-- 
To unsubscribe, e-mail: [EMAIL PROTECTED]
For additional commands, e-mail: [EMAIL PROTECTED]

Reply via email to