Hi John,
so far, there's no answer to this question. Up until now, fact is, that the SSA runs perfectly with 2.2.20 kernel on a Sun4d architecture (i.e. SS1000). Lou Piccicano and I did some testing on either SS10/20 (Sun4m) and the Ultra 1 but didn't succeed. In the source for fc4.c and/or soc is mentioned that this code was tested with the SS1000 and the Ultra 1 (?). So my personal hope was to get rid of my SS1000 and put the SSA on an Ultra box (and I did spent a lot of money and time on this issue). But if you get the same error than we did month ago, I am afraid, it doesn't work with the Ultra 1 :-((. We tried to contact the programmer of the fc4 / soc code but didn't get any feedback at all. Sorry to tell you this, but this is the status of this issue as far as I know. Matthias Am Mittwoch 17 Juli 2002 19:55 schrieben Sie: > -----BEGIN PGP SIGNED MESSAGE----- > Hash: SHA1 > > Hey Folks, > > I am attempting to get a SPARC StorageArray 114 working on my > Ultra1 (143 MHz) which is running SuSE for SPARC 7.3 as updated > through YOU. I can modprobe fc4 and soc, and this will light up > the "Fibre Icon" on the StorageArray. I do get a no > license/taint the kernel error warning, but it loads the modules > anyway. When I modprobe pluto to load pluto.o, I get the > following messages (after the no license/taint warning): > > /lib/modules/2.4.14/kernel/drivers/scsi/pluto.o init_module: No > such device Hint: insmod errors can be caused by incorrect module > parameters, including invalid IO or IRQ parameters > /lib/modules/2.4.14/kernel/drivers/scsi/pluto.o: insmod > /lib/modules/2.4.14/kernel/drivers/scsi/pluto.o failed > /lib/modules/2.4.14/kernel/drivers/scsi/pluto.o: insmod pluto > failed > > I googled and found that a very similar question was asked on > this list in February 2002, but I couldn't find if there was an > answer. Any help, pointers, etc. will be greatly appreciated. I > would hate to have to reinstall Solaris on this box. > > Thanks, > > John Heywood > > - -- > John Quentin Heywood > [EMAIL PROTECTED] > -----BEGIN PGP SIGNATURE----- > Version: GnuPG v1.0.7 (GNU/Linux) > > iD8DBQE9Na+sgYU8OFyQRP4RAlDXAJ4zvL7vsHh1dEahDZA/dNHLlcnP4gCeKjzo > MZxnie6sGs5x+obNWHulk+c= > =AxTI > -----END PGP SIGNATURE----- -- *********************************************************************** SMS Softwaretechnik Matthias Schulz Lange Strasse 44 70794 Filderstadt Tel: +49-7000-17 17 17 17 *********************************************************************** -- To unsubscribe, e-mail: [EMAIL PROTECTED] For additional commands, e-mail: [EMAIL PROTECTED]
